How to fix a Westinghouse ePX3100V that won't turn on?
If your Westinghouse Pressure Washer isn't turning on, there are a few things to check: * Ensure the power cord is connected to a grounded 120 Volt outlet. * Try pulling the trigger to release any water pressure in the hose. * Check the GFCI on the power cord and press the RESET button.
What to do if my Westinghouse ePX3100V is running but not spraying water?
If your Westinghouse Pressure Washer is running but not spraying water, consider the following: 1. Make sure the pressure washer is connected to a water main and not using water from a lake, pool, or pond. 2. Check the nozzle for clogs and clean it if necessary. 3. If the spray lance is defective, replace it.
Why is my Westinghouse Pressure Washer leaking at the hose connection?
If water is leaking where the hose connects to the spray gun of your Westinghouse Pressure Washer, it's likely due to a defective or missing O-ring between the high-pressure hose and the spray gun. Replace the O-ring to resolve this issue.
General| Brand | Westinghouse |
|---|---|
| Model | ePX3100V |
| Category | Pressure Washer |
| Language | English |
Key technical details and performance ratings for the pressure washer.
Crucial instructions to reduce the risk of injury and ensure safe operation.
Details on the GFCI protection built into the power cord.
Explanation of double insulation and its purpose for user safety.
Step-by-step guide to attach the lance to the spray gun securely.
Instructions for connecting the high pressure hose to the spray gun.
Steps to properly connect the high pressure hose to the pressure washer unit.
Guide for attaching the garden hose to the pressure washer's water inlet.
Detailed procedure for safely starting and stopping the pressure washer.
How to properly hold and operate the spray gun for effective cleaning.
Steps for safely removing and installing different spray nozzles.
Instructions on how to use the foam cannon and detergent for cleaning.
To Next Page
