How to fix a Westinghouse WPX2700e Pressure Washer that will not turn on?
If your Westinghouse Pressure Washer won't turn on, first, ensure the power cord is connected to a grounded 120 Volt outlet. Next, release any water pressure in the hose by pulling the trigger. Also, check the GFCI on the power cord and press the RESET button. If the issue persists, it could be a defective motor or power cord.
Why does my Westinghouse WPX2700e Pressure Washer turn on and off immediately?
If your Westinghouse Pressure Washer turns on for 2 seconds, shuts off, and won't turn back on, this is likely due to the auto-start feature priming the pump. The motor may run briefly and then shut off until you squeeze the spray gun trigger. This is normal operation.
How to fix a Westinghouse Pressure Washer that won't turn on?
If your Westinghouse Pressure Washer isn't turning on, there are a few things to check: * Ensure the power cord is connected to a grounded 120 Volt outlet. * Try pulling the trigger to release any water pressure in the hose. * Check the GFCI on the power cord and press the RESET button.
Why is my Westinghouse WPX2700e Pressure Washer running but there is no water flow?
If your Westinghouse Pressure Washer is running but not producing water flow, make sure it's connected to a water main, not a lake, pool, or pond. Check the nozzle for clogs and clean it if necessary. If the issue continues, the spray lance may be defective and need replacement.
What to do if my Westinghouse WPX2700e Pressure Washer is running but not spraying water?
If your Westinghouse Pressure Washer is running but not spraying water, consider the following: 1. Make sure the pressure washer is connected to a water main and not using water from a lake, pool, or pond. 2. Check the nozzle for clogs and clean it if necessary. 3. If the spray lance is defective, replace it.
General| Brand | Westinghouse |
|---|---|
| Model | WPX2700e |
| Category | Pressure Washer |
| Language | English |
Details the technical specifications for the WPX2700e and WPX3200e electric pressure washers.
Provides important warnings and notices for safe and proper operation of the pressure washer.
Explains the meaning of safety terms (DANGER, WARNING, CAUTION, NOTICE) and symbols used in the manual.
Key instructions to reduce the risk of injury, including warnings about injection, electrical shock, and general usage.
Details on grounding, GFCI protection, and safe electrical connections to prevent shock hazards.
Covers safe practices during operation, handling, and storage to prevent accidents and damage.
Identifies and explains the safety labels and decals found on the pressure washer unit.
Explains the importance of grounding and the function of the Ground Fault Circuit Interrupter (GFCI).
Details the AC motor requirements and compatibility with standard household power supply.
Identifies the main parts of the pressure washer using a diagram for reference.
Provides descriptions and functional information for key components like nozzles, spray gun, and soap tank.
Steps for removing carton contents and verifying all included parts are present and undamaged.
Instructions for installing wheels, cord retainer, and handle onto the pressure washer unit.
Guides for connecting the hose retainer, gun holster, spray gun, lance, and garden hose.
Procedure for safely starting and stopping the pressure washer, including auto-start feature.
Instructions on how to use the spray gun and install/remove different nozzles for cleaning.
Guidance on cleaning surfaces with and without detergent using the pressure washer.
Provides helpful tips for effective cleaning, avoiding surface damage, and unit maintenance during operation.
Instructions for cleaning the pressure washer exterior, nozzles, and water inlet screens.
Information on purchasing replacement parts and guidelines for proper storage to prolong unit life.
To Next Page
