Westinghouse iGen Series User Manual

8 | Westinghouse Outdoor Power Equipment
FEATURES
INVERTER FEATURES IGEN2300 & IGEN2600
Fuel Cap and Vent (vent: iGen2300 only): Open
the vent to run the engine and close the vent
when the engine is o.
Control Panel: Contains the reset breaker,
outlets and warning lights.
LED Data Center: Indicates low oil, overload
and output ready. Displays fuel level, power
output, remaining run time, voltage and lifetime
hours.
Engine Service Panel: Turn knob to unlock
and remove cover to service the oil, spark plug,
and air lter.
Recoil Handle: Pull to start the engine.
Engine Control Switch: Sets the choke, turns
the fuel on and o.
1
5
6
7
8
9
10
2
3
4
2
3
4
10
5
6
8
7
9
Muer and Spark Arrestor: Avoid contact until the
engine is cooled down. The spark arrestor prevents
sparks from exiting the muer. It must be removed for
servicing.
Engine Cooling Vents: Helps move airow in unit to
regulate engine temperatures.
Recoil Handle Protective Cover: Prevents pull cord
wire from damaging inverter body.
Oil Access Cover: Remove to service oil.
1

Westinghouse iGen Series Specifications

General

Brand	Westinghouse
Model	iGen Series
Category	Inverter
Language	English