To Next PageTo Next PageWhat to do if my Westinghouse LED TV has no power?
If your Westinghouse LED TV isn't powering on, first, check if the power indicator is illuminated blue. Then, ensure the power cord is securely connected to the AC-in jack and plugged into a working AC outlet. To verify the outlet is functional, try plugging in another electrical device.
How to fix no sound on Westinghouse LED TV?
If there is no sound on your Westinghouse LED TV, first, ensure the audio input cable is properly connected to the correct terminal and the correct input mode is enabled. The volume may be muted, so press the Vol+ key to turn on the volume. You can also adjust the Bass, Treble, and Balance settings in the Audio menu. If you are using the TV speakers, make sure the TV Speakers option is set to On in the Audio menu. If you are using an external audio device, press and select Audio to ensure the TV Speakers option is set to Off in the Audio menu.
What to do if Westinghouse LD-3235 LED TV remote control does not work?
If your Westinghouse LED TV remote isn't working, make sure you are pressing only one button at a time. Check that the batteries are properly inserted and replace them with new ones if they are drained.
How to troubleshoot no picture on Westinghouse LD-3235 LED TV?
If your Westinghouse LED TV has no picture, ensure the video input cable is properly connected to the correct terminal and the correct input mode is enabled. Verify that the antenna is properly connected and the preferred channel is enabled in the channel list. You may also need to adjust the display settings.
How to fix a cut-off picture on Westinghouse LED TV?
If the picture on your Westinghouse LED TV is cut off or appears in a sidebar screen, press to adjust the Aspect ratio.
How to reset a forgotten PIN on Westinghouse LED TV?
To reset a forgotten PIN on your Westinghouse LED TV, use the Reset All option in the Settings menu to reset your password.
How to improve poor image quality on Westinghouse LD-3235?
To improve poor image quality on your Westinghouse LED TV, check your antenna connection and rotate the antenna, waiting up to ten seconds for a signal if necessary. Reduce signal splitters and excessively long cables, and replace poor antenna cables or connectors. Press to adjust the Aspect ratio. Adjust the Noise Reduction setting in the Picture menu. In HDMI mode, ensure the external device is compatible with the LED TV.
Why are colors wrong on my Westinghouse LD-3235 LED TV?
If the colors on your Westinghouse LED TV are wrong, abnormal, or missing, check the video cable to ensure it is securely connected. Loose or broken pins in the cable connector could cause an improper connection. Adjust the Hue, Saturation, and Color Temperature settings in the Picture menu. Connect the TV to another computer to check if the problem is with the computer screen.
What to do if no picture or 'No Signal' appears when a VGA cable is connected to my Westinghouse LED TV?
If you see no picture or a 'No Signal' message when a VGA cable is connected to your Westinghouse LED TV, ensure the VGA cable is properly connected to the LED TV’s VGA port. Decrease the video resolution setting on the computer and try again. You might also need to adjust the display settings.
General| Screen Size | 32 inches |
|---|---|
| Resolution | 1366 x 768 |
| Display Type | LED |
| HDMI Ports | 3 |
| USB Ports | 1 |
| Refresh Rate | 60 Hz |
| Aspect Ratio | 16:9 |
| Inputs | Composite, Component |
| Sound Output | 2 x 5W |
| Dimensions (W x H x D) | 29.1 x 18.1 x 3.2 inches |
Safety precautions for fire and electric shock risks.
Guidelines for selecting the correct power cord for the LED TV.
Statement on FCC compliance and measures to address interference.
Detailed safety instructions for operating and handling the TV.
Warning against overloading electrical outlets and power strips.
Guidance on routing and inspecting power supply cords.
Importance of not blocking ventilation openings for overheating prevention.
Comprehensive list of warnings and precautions for TV usage.
Information on grounding outdoor antennas according to electrical codes.
Safety advice for lightning storms and unplugging the TV.
Warning about locating antennas near power lines.
Instructions for cleaning the TV screen.
Instructions for cleaning the TV case.
Manufactured under license from Dolby Laboratories.
Information on SRS trademarks and technology.
Step-by-step instructions for inserting batteries into the remote.
Information on the effective range of the remote control.
Detailed steps for attaching the TV stand to the unit.
Instructions for detaching the TV stand for wall mounting or storage.
Diagram and explanation for connecting an outdoor antenna.
Instructions for connecting cable TV signals to the unit.
How to connect the AC adapter and power cord to the TV and outlet.
Steps to turn on the TV and begin the initial setup process.
How to select the display language for menus.
How to set the local time zone for the TV.
Guide to using the setup wizard for scanning channels.
Steps for scanning over-the-air ATSC channels.
Instructions to obtain an activation code for ATSC tuner.
How to enter the activation code using the remote.
What to expect during the channel scanning process.
How to select the display language for menus.
How to set the local time zone for the TV.
Guide to using the setup wizard for scanning channels.
Steps for scanning cable/satellite ATSC channels.
Choosing whether to use a cable/satellite box.
Selecting the connection type for the cable/satellite box.
Warning against using RF connection due to poor signal quality.
Instructions to obtain an activation code for ATSC tuner.
How to select the display language for menus.
How to set the local time zone for the TV.
Guide to using the setup wizard for scanning channels.
Steps for scanning cable/satellite ATSC channels.
Choosing whether to use a cable/satellite box.
Instructions to obtain an activation code for ATSC tuner.
How to enter the activation code using the remote.
What to expect during the channel scanning process.
How to turn the LED TV on and off using the control panel or remote.
Instructions for adjusting volume and using the mute function.
Methods for changing TV channels using different remote keys.
How to switch between different video input sources.
Options for changing the picture aspect ratio.
How to adjust the screen's backlight for viewing conditions.
How to navigate and use the TV's setup menu system.
Sub-menus for configuring display quality settings.
How to adjust the TV's brightness level.
How to adjust the TV's contrast ratio.
How to adjust the color intensity of the picture.
Selecting preset picture modes for different viewing conditions.
Instructions for selecting desired video preset options.
How to adjust the sharpness or softness of the display.
Adjusting the white balance of the display.
Steps to select and adjust color temperature settings.
How to adjust the balance of red, green, and blue colors.
Option to reset all display-related settings.
Sub-menus for configuring audio quality settings.
How to calibrate low-pitched sounds.
How to calibrate high-pitched sounds.
Adjusting sound balance between left and right speakers.
Toggling between DRC Line mode and RF mode.
Selecting preset audio options for different conditions.
Turning the TruSurround HD feature on or off.
Steps to select ON or OFF for TruSurround HD.
Option to reset all audio-related settings.
Sub-menus for selecting the display's aspect ratio.
Picture displayed in its original size.
Picture displayed to cover the entire screen.
Picture scaled down to fit the display area.
Matches resolution to pixels without scaling.
Instructions for selecting desired view mode options.
Adjusting display settings specifically for VGA input.
Selecting the display's aspect ratio.
Adjusting the horizontal position of the display.
Adjusting the vertical position of the display.
Fine-tuning the display's picture.
Synchronizing the display automatically.
Managing channel list, sound, and scanning for channels.
Selecting channels to skip in the channel list.
Steps to add channels to the skip list.
Assigning a name to a TV channel.
Detailed steps for editing channel names.
Selecting multichannel television sound options.
Steps to select desired MTS options.
Scanning for available TV channels automatically.
Manually adding channels to the TV.
Steps for manually adding a channel.
Configuring operational settings and viewing firmware version.
Adjusting the current date and time settings.
Enabling or disabling auto calibration for time settings.
Selecting the correct time zone.
Detailed steps for adjusting date and time segments.
Enabling or disabling daylight saving time adjustments.
Configuring settings for closed captioning.
Modifying closed caption display options.
Setting up parental controls and changing the password.
Selecting ON/OFF to show or hide submenus for ratings.
Blocking or unblocking unrated programs.
Customizing US TV rating programs.
Selecting and blocking/unblocking desired TV ratings.
Selecting allowable movie ratings (G, PG, etc.).
Steps to select and block/unblock MPAA ratings.
Selecting Canadian TV program classification categories.
Steps to select Canadian English ratings.
Selecting French Canadian TV program classification categories.
Steps to select Canadian French ratings.
Blocking specific channels from being viewed.
Steps to block or unblock channels.
Changing the system PIN for parental control.
Detailed steps to change the system password.
Adjusting the duration the OSD menu stays on screen.
Steps to select OSD duration.
Selecting the display language for menus.
Steps to select the OSD language.
Configuring power-related settings like backlight.
Steps to adjust power settings.
Resetting all operational settings to default.
Viewing the LED TV's serial number and firmware version.
Important reminders before mounting the TV on a wall.
