Westinghouse Vintage User Manual

Name: Westinghouse Vintage
Brand: Westinghouse
Rating: 4 (1 reviews)

24 pages

To Next Page

To Previous Page

UL-ES-Vintage-WH09

MOUNTING BRACKET INSTALLATION

INSTALACIÓN CON SOPORTE DE MONTAJE

Remove the screws and star washers from the two mating holes (1) on the canopy. Loosen (do not remove) the screws in the mating slots (2) on the canopy.

Rotate the mounting bracket counter-clockwise and remove from the canopy.

Quite los tornillos y las dos arandelas en estrella de los dos orificios coincidentes (1) del dosel. Afloje (no quite) los tornillos de las ranuras coincidentes (2) del dosel.

Gire el soporte de montaje en sentido contrario a las agujas del reloj y extráigalo del dosel.

Questions and Answers:

M
Megan LeeJul 27, 2025
How to fix a wobbly Westinghouse Vintage?
- D
  Denise MccartyJul 27, 2025
  If your Westinghouse Fan is wobbling, you can try the following: * Ensure all blades are screwed firmly into blade holders. * Check that all blade holders are tightened securely to the motor. * Make sure the canopy and mounting bracket are tightened securely to the ceiling joist. * If the wobble persists, try interchanging two adjacent blades to redistribute the weight.