11
Picture 1 Picture 2 Picture 3
Picture 4 Picture 5 Picture 6
IMPORTANT: Make sure that the power cord passes through the
guides on the rear half of the base.
SETTING UP THE REMOTE CONTROL
Pull the plastic film from the battery compartment.
Operating the remote control: Point the remote control at the
infrared sensor making sure there are no obstacles. The remote
control range is 16.4 feet.
CHANGING THE BATTERY
1. Push the release button inwards and pull the battery casing
out. Remove the old battery.
2. Insert 1 x CR2025 3V battery ensuring you follow the polarity
(+and -) marked on the casing.
3. Slide the battery casing back into the remote control until you
hear it click into place.
WARNING: Do not expose the infrared sensor to direct sunlight or
other strong light, such as a florescent light.
HOW TO USE
WSFTYFE3608_Tower Fan_EN-FR_V3.indd 11WSFTYFE3608_Tower Fan_EN-FR_V3.indd 11 9/14/2022 3:58:48 PM9/14/2022 3:58:48 PM
To Next Page
Loading...
Need help?
General
