10
NOTE: All images shown are for illustrative purposes only and may
not be an exact representation of the product model.
BEFORE FIRST USE
• Unpack and remove all packaging materials from the appliance.
• Check for damage that may have occurred during transport.
If any parts are damaged or missing, do not use the appliance
and return it to your retail outlet immediately.
ASSEMBLING THE BASE
WARNING! Always unplug the appliance before assembly or
disassembly.
1. Loosen the base locking nut from the bottom of the unit by
turning it anticlockwise. Put it down the length of the power
cord as shown in (Picture 1).
2. Run the power cord through the central gap between the two
halves of the nu-assembled base as shown in (Picture 2).
3. Connect two halves by pushing the plastic pegs on each half
into the corresponding slots on the other half as shown in
(Picture 3-5).
4. Fasten the locking nut by turning it clockwise between the
round base and the fan body as shown in (Picture 6).
HOW TO USE
WSFTYFE3608_Tower Fan_EN-FR_V3.indd 10WSFTYFE3608_Tower Fan_EN-FR_V3.indd 10 9/14/2022 3:58:48 PM9/14/2022 3:58:48 PM
To Next Page
Loading...
Need help?
General
