Need help?Do you have a question about the Westwood V25-50HE and is the answer not in the manual?
General| Brand | Westwood |
|---|---|
| Model | V25-50HE |
| Category | Lawn Mower |
| Language | English |
Adjusting the tractor seat forward and backward for operator comfort.
Controls for cold engine starting (choke) and starting/stopping the engine (ignition).
Controls for engine speed, RPM monitoring, and hydrostatic drive pedals.
Using foot pedals for forward/reverse speed and hydrostatic transmission.
Procedures for stopping, parking the tractor, and disengaging the transmission.
How to engage the differential lock for improved traction on slippery surfaces.
Using the switch to engage/disengage the cutter deck blade clutch.
Electric or manual adjustment of cutting deck height using levers or rotary switches.
Monitoring operating hours and low fuel warnings via dashboard indicators.
Switches for raising/lowering the collector and emptying its contents.
Lever controls engagement and disengagement of the PTO drive for attachments.
Rocker switch turns headlights on/off; requires ignition to be on.
Warns the operator if the tractor exceeds a safe operating angle (25°).
Simple dashboard shows charge and fuel levels via red filtered squares.
Instructions for fitting and removing the net assembly for the powered grass collector.
Using levers to raise/lower the collector and tip collected cuttings.
Procedure for installing the drive belt for the powered grass collector.
Detailed steps for removing and fitting nets for S&T and V Series collectors.
Connecting the collector to the tractor and fitting the net empty plug.
Adjusting sweeper height for performance and standard grass collection procedure.
Procedure for raising and emptying the grass collector at the tipping area.
Switching between mulch and rear discharge modes on Combi and Mini Combi decks.
Guidelines for using the high grass mulch deck for tall or paddock grass.
Benefits of mulching, rules for mulch mowing, and deck cleaning.
Diagrams showing belt arrangements for various cutter deck models.
Referencing engine manual; battery charging rate and removal instructions.
Procedure for removing the deck for servicing and cleaning methods.
Checking and adjusting the tension of the engine to cutter drive belt for correct operation.
Details on self-tensioning transmission belt and checking transmission oil level.
Information on PTO main drive belt and dealer adjustments.
Procedure for installing and checking tension of accessory drive belts.
Troubleshooting engine start, power loss, belt slip, and overheating issues.
Checks for blade condition, deck levelling, tyre pressure, and axle issues.
Procedure to adjust the cutter deck for correct front-to-back levelling.
Adjusting the cutter deck for correct side-to-side levelling on different systems.
Details on rear and front adjustments for old and new deck level systems.
Checks for PTO engagement, belt direction, brush height, and net clogging.
Causes of flat tyres and checks for tyre spin or loss of grip.
Step-by-step guide for safely removing and refitting front and rear wheels.
Troubleshooting failure to turn over, no start, misfiring, and stalling issues.
Diagnosing issues with cutter engagement, safety switch, and battery impact on clutch.
Checks for blown fuses and resets for headlight and electric deck lift systems.
Troubleshooting blown fuses and disconnections for electric sweeper lift/empty and HE circuits.
Checking for charging problems indicated by 'C' symbol and display not lighting up.
Understanding the service interval indicator ('S') and reset procedure.
Details on tractor and PGC weight, fuel capacity, and PGC capacity.
Information on transmission types, speeds, tyre pressures, and turning radius.
Table detailing engine, displacement, power, torque, bore, and stroke for each model.
Specifications for V25-50HE tractor and PGC weight, fuel capacity, and PGC capacity.
Details on V25-50HE transmission, speeds, tyre pressures, and turning radius.
Table detailing V25-50HE engine, displacement, power, torque, bore, and stroke.
Log for recording service dates, hours, and dealer signatures for up to six services.
Manufacturer information, address, and model-specific technical data in a table.
Statement of conformity to directives and applied standards, signed by managing director.
To Next Page
