Wetrok Duomatic C43 User Manual

Wetrok Duomatic C43

92 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

(D) Betriebsanleitung | (F) Mode d’emploi | (I) Instruzioni d’uso | (En) Operating instructions |

(Nl) Gebruiksaanwijzing | (Sp) Instrucciones de manejo | (Swe) Bruksanvisning | (Fl) Käyttöohjeet |

(Da) Driftsvejledning | (Pl) Instrukcja obslugi | (Port) Instruções de funcionamento |

(Tr) Kullanim kilavuzu | (Ara)

Wetrok Duomatic C43/C50/C60

Questions and Answers:

L
Leslie AndersonAug 1, 2025
What to do if the Wetrok Scrubber drive, brush, or suction motor doesn't work?
- C
  Charles MillerAug 1, 2025
  If the drive motor, brush motor, or suction motor isn't working, several issues could be the cause. First, ensure the main key switch (B1, H2) is set to ON. Check that the battery charging plug (C8, D1) is connected. If the red LED (B4) is flashing, the battery needs charging. For BMA versions, the drive and brush motors, along with the pump, won't start if the operating lever (H3) isn't engaged. If the suction motor stops and the red LED (B7) flashes, empty the dirty water tank, reduce foam formation, and clean around the sensors. Finally, if the overload indicator (B3, H5) activates and the red LED flashes, reset it using the main key switch (B1, H2).
A
Ashley ThomasAug 14, 2025
Why is the suction performance of my Wetrok Scrubber weak?
- J
  Jessica WagnerAug 14, 2025
  Weak suction performance in your Wetrok Scrubber could be due to insufficient cleaning elements. Consider replacing them. Ensure you are using appropriate cleaning elements. Also, dose Wetrok detergents according to the packaging label. Adjust the working speed and water flow to match the level of dirt, and consider using the indirect cleaning method if necessary. Clean the fresh water filter (E3, F4) and the primary filter (G4).

Wetrok Duomatic C43 Specifications

General

Brand	Wetrok
Model	Duomatic C43
Category	Scrubber
Language	English

Summary

2. Machine Description

3. Safety Regulations and Accident Prevention

3.1 Sources of Hazards in E Models

Identifies specific electrical hazards and precautions for E models.

3.2 Safety Regulations and Accident Prevention Notes

3.3 Emergencies/Emergency Response

Immediate actions to take in case of an emergency or incident.

4. Application, Operation and Work Method

4.1 Before Commissioning/Initial Operation

4.2 Starting the Machine Up

4.3 Work Methods

4.5 Emergency Brake

Description of the emergency stop function and its activation.

5. Maintenance and Cleaning

5.1 Safety Instruction

Important warnings and precautions for maintenance and cleaning procedures.

5.3 Maintenance Schedule

5.4 Charging the Battery

6. Troubleshooting

6.1 Motor Issues

Diagnosing and resolving issues with the machine's drive, brush, or suction motors.

6.2 Suction Performance Issues

6.3 Cleaning Performance Issues

Related product manuals

Wetrok Duomatic C50

Wetrok Duomatic Series

Preview: Wetrok Discomatic Mambo

Wetrok Discomatic Mambo

Preview: Wetrok Sprinter XR 70

Wetrok Sprinter XR 70