10
Network
Projector Setting
Others
The V50 Pro can be connected to the Internet via a wireless (WiFi) connection.
1. Select [Settings] > [Network] > [Network Information] > [Scan]
2. Select your WiFi name from the list, enter the password, and connect.
Picture Mode [Standard] / [Dynamic] / [Mild] / [User]
Color Temperature [Medium] / [Cool] / [Warm] / [User]
Noise Reduction [O] / [Low] / [Middle] / [High]
Sound Mode [Standard] / [Movie] / [Music] / [Sports] / [User]
OSD Language Select an on-screen display language
Aspect Ratio [AUTO] / [4:3][16:9] Only for multimedia display
Restore Factory Default All data and setting on the built-in storage will be erased.
Projection Mode
[Front]: The projector is located in front of the projection surface.
[Rear on Desk]: The projector is located behind the projection surface.
[Front on ceiling]: The projector is hanging from the ceiling in an upside down position.
The image is rotated by 180 degrees.
[Rear on ceiling]: The projector is hanging from the ceiling in an upside down position
behind the projection surface. The image is rotated by 180 degrees and horizontally
mirrored.
Projection Zoom [50%--100%]: Adjust the projection screen size.
To Next Page
Loading...