To Next Page
G
Gary SalazarAug 5, 2025
What to do if the WFI E024 control responds improperly?
- MMr. Ryan Adkins DDSAug 6, 2025
If the WFI Heat Pump's control responds improperly, first ensure that the component being controlled, such as the compressor, blower, or reversing valve, is functioning correctly. Next, verify that the wiring from the control to the component is working as it should, using the diagnostic outputs mode and referring to the LED Definition table. If both the component and wiring are functioning, then the unit control should be replaced.
General