EasyManuals Logo

Whale BE9003 Instruction And Installation Manual

Whale BE9003
9 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Bilge Accessories
Bilge Accessories
48 Manual Bilge
48
NEW Electric Field Sensor Range
Electric field sensor automatically senses water levels
and switches on the bilge pumps
Nylon material - withstands high temperatures
Automatically switches on when 51mm (2") of water is sensed and turns off
when water drops below 13mm (½")
BE9006 model - built in 30 second off delay for efficient operation, prevents
cycle in small sump installations or enables lower drain than 13mm (
1
/
2
”)
Easy wiring
- two colour coded wires
for easy installation
Easy installations
- side or base mounting
ears to suit your installation
Testing
- two test circle to
ensure activation
Model Specifications
Model Electric Field Sensor Switch Electric Field Sensor Switch
with 30 second time delay
Product Number BE9003 BE9006
Voltage D.C. 12V d.c. or 24V d.c.
Current Suitable for up to 20 Amps
Residual Current 0.008 Amp
Suitable for Orca and Supersub standard submersible ranges – pages 26 and 28
Model Specifications
Model Whale Float Switch
Product No. BE9002
Voltage D.C. 12V d.c. or 24V d.c.
Current Suitable for up to 15 Amps
Float Switch
Floatswitch Ideal for use with Electric Bilge Pumps
Environmentally friendly - no toxic mercury
Easy to install mounted on either horizontal or vertical surface (e.g. bulkhead or hull)
Suitable for installations where amp draw is up to 15 amps
Compact design
Can be used as a high water bilge alarm (when vertically mounted)
Suitable for Orca and Supersub Standard Submersible ranges see pages 26 and 28
Note: These specifications are retail items only.
For details of our bulk pack range for boat builders and wholesalers - contact Whale Support.
BE9002
BE9003 / BE9006
Electric Bilge Switches
Complete Your System
Fit Whale
®
high quality pumps and accessories to ensure long term reliability throughout your bilge waste
system. Whale switches, diverter valves, and pipework connections are designed and manufactured with
highest quality at heart. Combine these accessories with your Whale bilge pumps for reliability and durability.
Need specific advice on your system? Contact our technical team at Whale Support
See below for a full list of accessories
Side View
Side View Plan View
Tel.: +49
(
0
)
40 - 88 90 100
www.toplicht.de
Schisausrüster

Other manuals for Whale BE9003

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Whale BE9003 and is the answer not in the manual?

Whale BE9003 Specifications

General IconGeneral
BrandWhale
ModelBE9003
CategorySwitch
LanguageEnglish

Related product manuals