OPERATING MANUAL AND USER GUIDE
13
SPECIFICATIONS
Maximum Balanced Output
Level (1%T.H.D. at 1KHz )
Maximum Unbalanced
Output Level (1%T.H.D. at
1KHz )
THD+N
Frequency Response
Hum and Noise 20Hz-20KHz
(150R)
S/N
FFT
CMRR
Maximum Input Level
Impedances
Mono Input Channel Gain
Input Channel EQ
Effect Out
Level Meter
AC Power options
Dimensions (H x W x D)
Weight
Main XLR Balanced Out +26.5dBu ±1dBu
Main ¼" Jack Balanced Out +26.5dBu ±1dBu
Main XLR Unbalanced Out +21dBu ±1dBu
Main ¼" Jack Unbalanced Out +21dBu ±1dBu
Headphone Output 150mw ±5mw @ 32Ω
<0.025% @ + 14dBu ±0.5dBu
20Hz~20kHz ±2dB
-127dBu ±5dBu Mic Pre Equivalent Input Noise
-85dBu ±5dBu Residual Noise
78dB ±5dB @ Fader Max
-62dBv ±5dBv @ Gain Fader Max
62dB ±5dB @ 1KHz
Mic +4dBu ±1dBu
Channel Line +21dBu ±1dBu
Stereo Line +21dBu ±1dBu
AUX Return In +21dBu ±1dBu
Mic: Balanced 6KΩ, Unbalanced 3KΩ ±200ohms
Line: Balanced 44KΩ, Unbalanced 22KΩ ±2KΩ
AUX Return: Balanced 20KΩ, Unbalanced 10KΩ ±2KΩ
All Other Unbalanced outputs: 100Ω, Balanced Outputs: 50Ω
50dB Variable MIC (0~-50dB) Line (-20dB~ +30dB)
High (±10dB) ±1.5dB 12kHz Shelving
Mid (±10dB) ±1.5dB 1kHz Shelving
Low (±10dB) ±1.5dB 80Hz Shelving
16x Effects: (1)Hall1 (2)Hall2 (3)Room1 (4)Room2 (5)Room3
(6)Platereverb1 (7)Platereverb2 (8)Platereverb3 (9)Chorus
(10)Flange (11)Delay1 (12)Delay2 (13)Chorus/Room1 (14)Chorus/
Room2 (15)Bypass (16)Rotaryspeaker
12 Segment LED x2 (Output of +4dBu = 0dB) Main L/R
AC100V-240V~ 50/60Hz
80mm x 400mm x 369mm
5.2kg
0dBu=0.775Vrms
SL824USB
To Next Page