Wharfedale Pro V 12M - Page 2

OPERATING MANUAL AND USER GUIDE
1
IMPORTANT WARNINGS & SAFETY INSTRUCTIONS
1. READ ALL INSTRUCTIONS – carefully and become familiar with the features and functions of these
products before operating them.
2. RETAIN THESE INSTRUCTIONS – for future reference.
3. COMPLY WITH ALL WARNINGS – All warnings and instructions for this product should be adhered to.
4. USE WITH AMPLIFIERS – In order to avoid damage to drivers and other equipment, it is advisable to
establish and follow a routine for powering up and powering down a sound system. With all system
components connected, turn on source equipment (mixers, signal processors, record and playback
units, etc.) BEFORE powering up ampliers. Transient voltages from powering up source equipment
can damage speakers if ampliers are already turned on. Make sure that amplier volumes are set to
their minimum settings and power up any system ampliers LAST. It is recommended that all system
components be allowed to stabilize for several seconds before any source signals are introduced
or level setting adjustments are made. Similarly, when shutting systems down, turn all ampliers off
rst, before powering down any other system components.
5. CABLES – Do not use shielded or microphone cables for connection between amplifiers and
speakers. Use only approved speaker cables with proper connectors.
6. CAUTION – These professional loudspeaker systems are capable of generating very high sound
pressure levels. Use care with placement and operation to avoid exposure to excessive volume
levels. Permanent hearing damage can result when operated to extreme levels.
7. SERVICE – There are no user serviceable parts inside this product. Users should not attempt to
service this product. Warranty nullication could result if this is attempted.