Need help?Do you have a question about the Wheel Horse C-121 and is the answer not in the manual?
General| Horsepower | 12 hp |
|---|---|
| Drive Type | 2WD |
| Fuel Type | Gasoline |
| Tires (Rear) | 23x8.50-12 |
| Cutting Width | 42 inches |
| Starter Type | Electric |
| Engine | Single cylinder 4-stroke |
| Transmission | 8-Speed |
| Tires (Front) | 4.00-8 |
| Displacement | 30.1 cu in (493 cc) |
Details on the mechanical and hydrostatic transmissions for various tractor models.
Information on the tractor's electrical system, including battery and alternator.
Specifications for the tires used on different tractor models.
Detailed physical dimensions, wheelbase, and dry weight for each tractor model.
Key specifications for engine tune-up, including spark plug gap, timing, and capacities.
Guidelines for safe operation of the tractor, covering general handling and precautions.
Specific safety advice for operating riding vehicles, including fuel handling and ventilation.
Critical safety instructions to follow before operating or servicing the tractor.
Location of VIN plates on tractors and major attachments for identification.
Information on obtaining and using the Owner Identification Card for warranty service.
Guidance on obtaining a separate parts manual for the equipment.
Description of the throttle control lever and its function for engine speed regulation.
How to use the choke control for starting the engine in cold conditions.
Explanation of the ignition switch positions for starting, running, and stopping the engine.
How to engage and disengage the PTO clutch lever for powering attachments.
Procedure for engaging and releasing the parking brake lever.
How to apply the brakes using the brake pedal.
Function of the clutch pedal for declutching and safety interlock.
How to select forward speeds or reverse using the gear shift lever.
How to select high or low range for transmission speed and pulling power.
Operation of the light switch on B-111 models.
Location and function of the fuel shut-off valve.
How the ammeter indicates battery charge or discharge status.
Description of the throttle control lever for engine speed.
Operation of the choke control for starting the C-Series engine.
How to use the brake pedal on C-Series 8-speed models.
Function of the clutch pedal on C-Series 8-speed models.
Operation of the brake/neutral pedal on C-Series automatic models.
How to engage and disengage the PTO clutch lever.
How to use the gear shift lever on C-Series 8-speed models.
How to use the range selector on C-Series 8-speed models.
How to control tractor movement with the motion control lever.
Procedure for engaging and releasing the parking brake lever.
How to engage/disengage the transmission clutch lever.
Operation of the manual lift lever for attachments.
Operation of the hydraulic lift lever for attachments.
How to operate the light switch on specific C-Series models.
Function of the ignition switch for starting and stopping the engine.
Location and function of the fuel shut-off valve.
Information on the fuel gauge and vent cap for the fuel tank.
How the ammeter indicates battery charge or discharge status.
Function of the transmission oil temperature gauge for monitoring.
How the engine oil pressure gauge indicates engine condition.
Operation of the choke control for starting the D-Series engine.
How the throttle control regulates engine speed.
Operation of the brake pedal for dynamic braking and neutral engagement.
How to engage and disengage the PTO clutch lever on D-200 models.
How to engage and disengage the PTO clutch using a switch.
How to control tractor movement with the motion control lever.
Procedure for engaging and releasing the parking brake lever.
Operation of the mid hydraulic lift lever for attachments.
Operation of the 3-point hitch hydraulic lift lever.
How to operate the light switch on D-Series models.
Function of the ignition switch for starting and stopping the engine.
Information on the fuel gauge and vent cap.
Location and function of the fuel shut-off valve.
Explanation of the safety interlock switches for starting and operation.
Procedures for correctly starting and operating the engine.
Steps for starting the engine on 6 & 8-speed transmission models.
Steps for starting the engine on automatic transmission models.
Procedure for safely stopping the tractor's engine.
How the throttle control regulates engine speed for efficient operation.
How to use the choke control for starting cold engines.
Recommended type of gasoline for refueling the tractor.
Recommended engine oil types and classifications for optimal protection.
Proper procedures for operating automatic transmissions, especially in cold weather.
How to move the tractor forward using the control levers.
How to move the tractor backward using the control levers.
Methods for safely stopping the tractor's motion.
How to operate the push valve for manual tractor movement.
Information on the D-Series transmission cooling fan.
Proper procedures for operating 6 and 8-speed transmissions.
How to safely change speeds or direction of travel.
Instructions for installing and removing attachment belts for various tractor models.
Guidelines for easy installation and removal of attachments on B-Series tractors.
How to install and remove attachments using Tach-a-matic hitches.
Best practices for operating the tractor with a mower attachment.
Safe operation of the snowthrower attachment in various snow conditions.
Guidelines for using the snow blade attachment for snow removal.
How to operate dozer and grader blades for moving materials.
Proper use of the tiller attachment for garden preparation.
Instructions for using various tillage attachments for seed bed preparation.
How to use attachments that connect via a drawbar hitch pin.
Schedule of required maintenance tasks for the tractor.
Recommended API service classifications for engine oil based on engine type.
Procedure for checking and maintaining the correct engine oil level.
Instructions for changing engine oil and replacing the oil filter.
How to replace the oil filter on D-160 and D-200 models.
Procedures for cleaning and replacing air filter elements for various models.
Information on servicing breaker points and condensers for engine timing.
When and how to adjust the carburetor for optimal engine performance.
How to service and replace the fuel filter to ensure fuel system cleanliness.
Overview of the tractor's charging and electrical systems.
Proper care and maintenance of the tractor's battery.
Recommended oil quality for hydrostatic transmissions.
Procedure for checking and maintaining the automatic transmission oil level.
When to replace the transmission oil filter.
How to clean and maintain the cooling fan for D-Series transmissions.
Recommended oil type and capacity for the 8-speed transmission.
How to check and maintain the oil level in the 8-speed transmission.
Information regarding the 6-speed transmission lubrication.
Procedure for lubricating chassis components like steering and wheel bearings.
How to adjust the foot brake for proper operation on different models.
Procedures for adjusting the PTO clutch and brake mechanisms.
Specific adjustments for the PTO clutch and brake on D-160 models.
Specific adjustments for the PTO clutch and brake on D-200 models.
Maintenance procedures for the PTO clutch on D-200 models.
How to adjust the tractor seat for operator comfort.
Guidelines for cleaning the tractor and preparing it for storage.
To Next Page
