WHEELCARE SUPERLIGHT - Chapter 4 - Disassembly

25
CHAPTER 4 - DISASSEMBLY
4.1 Separation of Tiller from Frame (See Fig. 14).
For ease of operation we recommend working on the
left side of the SUPERLIGHT (facing forward ):
a. Disengage the Electric Plug from its
socket in the Tiller by squeezing the
Snap Button (located on the plug) - and
pull.
b. Support the Tiller with your left hand
holding the Upper Left Rail.
c. Push the Retaining Spring with the
thumb of the right hand until it is freed
from the Groove on the (black) Tapered
Pin.
d. Carefully lift the Frame off the Tapered
Pin and lay both sections on the floor.