36
5.2 Charging Adapter (Optional)
The Charging Adapter enables charging the batteries
when they are removed from the SUPERLIGHT.
This is needed when a wall outlet is not available close
to the SUPERLIGHT’s position, when you have extra
set of batteries, or when the SUPERLIGHT is stored .
In such cases you can remove the batteries from the
SUPERLIGHT (as per the instructions in Chapter 4)
and use the Charging Adapter to charge the batteries.
a. Connect the two Electrical Plugs of the
Charging Adapter to the two batteries.
b. Connect the Charging Plug of the
Charger to the Charging Socket in the
Charging Adapter.
c. Connect the Charger to a wall outlet
.
− The charging process described in
paragraph 5.1.
Note: See relevant battery capacity indicator instructions
(paragraph 3.8) when using charging adapter.
. In case that Charging Adapter is used to charge
the Batteries out of the SUPERLIGHT, the Battery
Capacity Indicator of the vehicle will not reset
automatically
To reset the Battery Capacity Indicator
Turn on the key switch and wait for 2 minutes
without driving
To Next Page
Loading...