To Next PageTo Next Page
Need help?Do you have a question about the Whelen Engineering Company E-2010 and is the answer not in the manual?
General| Brand | Whelen Engineering Company |
|---|---|
| Model | E-2010 |
| Category | Control Unit |
| Language | English |
Explains the 10-digit DTMF format for activation commands and status feedback.
Configures RS-232 communication and printer ports for PC or printer connection.
Sets up the status polling routine by listing all remote siren addresses in the system.
Programs Time-of-Day Call Keys for automatic activation based on day and time.
Configures Area Code, Xmitter Up time, Base ID, and Channel Grant settings.
Details the process of programming Call Keys sequence by sequence using commands.
Describes how to change existing Call Key sequences one at a time.
Describes Call Keys #57-60 activated by external remote inputs.
Describes Call Keys #61-62 activated automatically by date and time.
Identifies Low Battery and Intrusion as the two remote siren alarm conditions.
Lists functions like storing data, selectable printing, and Call Key programming via PC.
Details pin connections for DTMF Channels 1 and 2, including Push To Talk and Audio.
Describes pin connections for remote inputs like Intrusion, Low Battery, and Call Keys.
Setting DTMF Transmit and Microphone levels for proper audio deviation.
Solutions for issues like a blank display or a non-functional keyboard.
Troubleshooting PC and printer connection problems or port setup.
Lists specifications for DTMF tone levels, microphone volume, jack, and connectors.
