Model: C2 series
en-1
1.6kg
1. This manual describes how to use the [Model C2 Backrest Mounting System] safely. It also describes how to install the product and replace parts for dealers,
distributors, and sales representatives. To use this product properly, be sure to read this manual carefully before use, and contact your dealer if you have any
questions.
2. Keep this manual together with the instruction manual for the Model C2.
3. Before using the product, be sure to refer to the instruction manual of the Model C2 for operating procedures and precautions. This manual contains only items
related to the [Model C2 Backrest Mounting System].
4. The figures in this manual may differ in appearance from the actual product.
5. Although every effort has been made to ensure the accuracy of the contents of this manual, please contact your dealer if you have any questions, errors, or
concerns.
6. A label with product information is attached to this product at the location indicated in the figure below.
7. The table below shows the specifications of the Model C2 with the [Model C2 Backrest Mounting System] installed. For other specifications, please refer to the
instruction manual of Model C2.
Symbol Description
Instructs to read the instruction manual before starting work or
before operating equipment or machinery.
Indicates instructions to prevent a hazardous situation that may
result in injury, property damage or both.
The symbols used throughout this manual are described below. Be sure to observe the instructions indicated by each symbol.
Symbol Description
Indicates a prohibited act.
Indicates precautions or reference information that must be read
in order to prevent device malfunctions or failures, and to ensure
comfortable device use.
24 – 10060 – 0
Model C2 Backrest Mounting System
https://whill.inc/
Unavailable
Item Value Note
Device weight
16 in：51.3kg
18 in：52.0kg
20 in：52.2kg
Values do not include the back support weight.
Back support angle
90°
-
Device height 760mm – 840mm Values do not include the back support height.
Weight capacity
115kg (16” seat)
136kg (18” and 20” seats)
Be sure to properly install the back support.
Maximum inclined slope
6°
Be sure to properly install the back support.
en
To Next Page
Need help?
General
