Whirlpool 1159801 - The exhaust control; Changing air direction

Operating Your Air Conditioner
Continued
Tab
The exhaust control
The Exhaust Control setting draws stale or smoky
air from the room.
1. To exhaust room air:
l Set Exhaust Control to OPEN.
l If no cooling is desired, use FAN ONLY setting.
l For cooling, set System Control to desired
COOL setting.
2. To circulate room air:
l Set Exhaust Control to CLOSED.
l If no cooling is desired, use FAN ONLY setting.
l For cooling, set System Control to desired
COOL setting.
NOTE: For maximum performance, the Exhaust
Control must be in the CLOSED position when
cooling, or room air circulation is desired.
Changing air direction
The louvers, in the top grille area of the air
conditioner, control the direction of the cooled air.
Move the tab, at the top of the louvered area, in
the direction you want the air to go (right, left, or
straight ahead).