7, Strip w_ee back approximately 1/4 of an indl.
8. W_h ba_el crimpers, _lmp _/*" ir_vteted female
ten_nlnal$,Inclucleclwith motor, ontothe wire leads
NOTE: Make sure terminals are crimped securely
In place.
9. Connect the white(SM) wire lead ontothe i/€ terminal
marked "5" on the motor swlte,h. See _ 4.
10. Connec_the purple_ wire !ead ontothe 1M terminal
,.a'_d "_"?,the...motors_ch.seeRg_ur_e_....
11, RcconneGtgroundwire to motor. See Rgura 4.
12. All wire lead conneotlOns are complete at this polnL
You can now reln_tlhe'motor and brackete._embly
intounit.
_4
To Previous Page
Loading...
