6, From the s',_ end of b'le replacement motor, cut
the thread_l portion of the motor shMt off using a
hacksaw. See Rgure 3.
_LU_IABLE
CUI"II'IREAOED
7. _th an allenwrench, remove re pulleyt'rom the
dalec6ve motorand reinstallit on the mplacemem
motor.Be _uro to pushpull_yontothe motor st,._
allthe wayandtightenthe setscrewsecurelyinplace.
9. PositionmotoraSshownb_ 5.Note the locazior_
of the motor swl_. Secure zpotorto bracket with
the odglnaJmotordamps.
1
Compare and note difference between the motor
s_etah of the defe_,e motor and the switch of '_e
new mp|a_ement motor, IIthe switchesare the same,
simply inst_l] the motor in reve_ order you've
removed the defeotive motor. See F_v._e$ ,dA& 4B.
If not. proce_:l to step 9.
NOTE: Overload protector is part of the plug-
gable switch on the replacement motor and
separete on the old motog 9wit_.
OVERLOAOPROTECTOR
OLO
MOTOR
SWITCH
omen .o
RGURE'J
279807
FIGURE44
(¢ontP,_O
To Next Page
Loading...
