3-2
ELECTRICAL SHOCK HAZARD
Disconnect power before servicing the range.
Replace all panels before operating range.
Failure to do so can result in death or electri-
cal shock.
RAISING THE COOKTOP
1. Turn off the gas and electrical power going
to the range.
2. Remove the grates and keep-warm rack
from the cooktop.
CAUTION: When you work on the gas range,
be careful when handling the sheet metal parts.
Sharp edges may be present, and you can cut
yourself if you are not careful.
WARNING
FIRE HAZARD
Shut off gas supply line valve before servic-
ing the range.
Check all gas line connections and replace
all panels before operating the range.
Failure to do so could result in explosion, fire,
or other injury.
Keep-Warm Rack
Grate
4. Remove the mounting screw from each of
the four burners.
3. Lift the four burner caps and burner bases
off the burners and the spark ignitors.
Burner Cap
Burner Base
5. Lift the front of the cooktop and unsnap it
from the two clips, then raise the cooktop
and prop it up.
Clip
Clip
Burner
Mounting
Screw
To Next Page
Loading...
