To Next PageTo Next Page
Need help?Do you have a question about the Whirlpool ADP 952 WHM and is the answer not in the manual?
General| Brand | Whirlpool |
|---|---|
| Model | ADP 952 WHM |
| Category | Dishwasher |
| Language | English |
Physical dimensions of the dishwasher unit, including height, width, depth, and weight.
Details regarding the thickness, width, height, and maximum weight of the decor plate.
Key specifications for the normal program, including capacity and water consumption.
Information on appliance alarms such as refill rinse aid, refill salt, and water leakage.
Outline of the dishwasher program stages: start indicator, pre-rinse, main wash, drying, and end.
Water volumes used during different stages of the normal wash program.
Details regarding the salt container, resin container, and regeneration dosage.
Information on inlet water pressure and spray pump pressure.
Data on flow meter, spray pump, drain pump, and various valve flow rates.
Specifications for voltage, frequency, total power, and fuse rating.
Details on spray pump and drain pump motors, including power and resistance.
Information on the heating element, power consumption, resistance, and temperature.
Resistance values for reed contacts related to flow meter and salt/rinse aid control.
Resistance of the NTC sensor at various temperature points.
Water hardness levels (dh, mmol/l, °Fh) for different regeneration positions.
Step-by-step guide for running the service test program on dishwashers.
Key precautions for testing and common failure codes (F1, F2, F9).
LED indications for various failures on Whirlpool/Ignis appliances.
Instructions and sequence for executing the passive test program.
LED indications for failures on Bauknecht appliances (low/high versions).
Steps for passive test program on rotary and push button models.
Step-by-step guide for running the active test program.
Notes on program behavior, leaving the test, and failure indication methods.
Diagnosis for NTC break, including temperature ranges and possible causes.
Causes and detection methods for water leakage failures.
Identification of heating system defects, low heating speed, and relay issues.
Causes for draining failures, including pump defects and syphon blockages.
Symptoms and causes for blocked spray arms, including sensor and motor issues.
Conditions indicating a closed water tap, hose blockages, or valve defects.
Causes and symptoms related to flow meter failures and water indicator defects.
Issues causing water level monitoring failures, including sieve blockage and foam.
Causes of continuous water inlet, including valve and triac issues.
Table detailing available wash programs for different appliance types.
Explanation of how programs are locked after starting and stored.
Locations and types (common line, analogue, digital) of test points.
Voltage checks for control-display board communication.
Voltage checks for control-user board communication.
Test points for Bauknecht control boards (high/low range).
Voltage checks for Bauknecht control/user/display boards.
Voltage checks for Bauknecht multiplex signals.
