EasyManua.ls Logo

Whirlpool AWG 908 E - User Manual

Whirlpool AWG 908 E
2 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
AWG 908 E / AWG 910 E PROGRAMME CHART
5019 301 20130
Whirlpool is a registered trademark of Whirlpool USA
L
: optional / Yes : dosing required
1)
For improved garment care, spin speed is restricted in these programmes.
The “wool” programme of this washing machine has been approved by The Woolmark Company for the washing of
garments labelled as “machine washable”. Follow the instructions given on the label sewn on the garment and the
instructions supplied by the washing-machine manufacturer. (Cert. no. M0402-M0403-M0404-M0405).
Programme
Tempe-
rature
Care
Labels
Max.
Load
kg
Type of wash/Notes
- For temperature selection, respect the manufacturer’s
recommendations on the care label
Detergents and additives Special functions
Max.
spin
speed
rpm
Pre
wash
Main
wash
Softener Pre
wash
Start
delay
Easy
Ironing
Intensive
rinse
Rinse
hold
Variable
spin
White Cotton
Antibacterial
75 - 90 °C
5.0
Normally to heavily soiled bed linen, table linen and
underwear, towels, shirts etc. made of cotton and
linen.
At a temperature of 80°C or more, this programme
eliminates bacteria, ensuring sanitization of your
laundry. The bacteria removal efficiency has been
tested following a similar methodology to the NF EN
13697 standard of Nov. 2001.
L
Ye s
LLL L L
L
Max.
Cotton
60 °C
5.0
30 - 40 °C
5.0
Synthetics
30 - 60 °C
2.5
Normally soiled blouses, shirts, overalls etc. made of
polyester (Diolen, Trevira), polyamide (Perlon, Nylon)
or blends with cotton.
L
Ye s
LLL L L L L
800
1)
Delicates
30 - 40 °C
2.5
Curtains and delicate clothing, skirts, shirts and
blouses.
Ye s
L
L
——
LL
500
1)
Wool
30 - 40 °C
1.0
Only woollens labelled with the Woolmark and
identified as machine washable.
This programme (40°C) is tested and approved by The
Woolmark Company for handwashable wool.
Ye s
L
L
——
LL
800
1)
Lingerie
——
2.5
Curtains and delicate clothing in wool or silk only
washable in cold water.
Ye s
L
L
——
LL
500
1)
Handwash
30 °C
2.0
Garments made of linen, silk, wool and viscose marked
as “handwashable”.
Ye s
L
L
——
LL
800
1)
Quick wash
35 °C
2.5
Outer clothing worn for short periods and made of
cotton, polyester, polyamide and cotton blends.
Ye s
L
L
——
L
Max.
Daily load
40 °C
3.5
Slightly to normally soiled garments made of cotton
and/or synthetics.
L
Ye s
LLL L L
L
Max.
Cold wash
——
5.0
Slightly soiled garments in cotton and/or synthetics
washable only in cold water.
Ye s
L
——
LL
L
Max.
Rinse
——
5.0
Same as the last rinse and the final spin in the “Cotton
programme.
——
L
L
L
L
Max.
Drain
Spin
——
5.0
In this programme spinning is intensive. Same as the spin
cycle in the “Cotton” programme.
———
L
——
L
Max.
E H
F
J O G
A
B
C
D
This washing machine is equipped with
automatic safety functions which
detect faults at an early stage and react
appropriately, e.g.:
A. “Service” indicator
B. “Clean Pump” indicator
C. “Water Tap Closed” indicator
D. “Door lock” indicator
E. Programme selector
F. “Start” button
G. “Variable spin” button
H. The programme sequence indicator
/ Start delay time indicator
O. Optional function buttons
J. “Start delay” button
30120130GB.fm Page 1 Wednesday, August 8, 2007 10:16 AM
Black process 45.0° 150.0 LPI
Downloaded From WashingMachine-Manual.com Manuals
Question and Answer IconNeed help?

Do you have a question about the Whirlpool AWG 908 E and is the answer not in the manual?

Summary

Automatic Safety Functions

Service Indicator

Indicates a fault in an electrical component, refer to troubleshooting guide.

Clean Pump Indicator

Water not pumped out; check drain hose or filter for blockages.

Water Tap Closed Indicator

Insufficient water supply; ensure water tap is open.

Door Lock Indicator

Door not properly closed; attempt to close it again.

Programme Chart Controls

Programme Selector

Used to select the desired wash programme for the laundry.

Start Button

Initiates or pauses the selected wash programme.

Variable Spin Button

Allows adjustment of the spin speed for the programme.

Programme Sequence Indicator

Displays the current stage of the running wash programme.

Start Delay Button

Enables programming a delayed start time for the wash cycle.

Optional Function Buttons

Activates additional features or options for the wash cycle.

Programme Selection and Operation

Add Detergents and Select Programme

Instructions for adding detergent and choosing a wash programme.

Select Any Desired Option

Guides on activating optional functions like Prewash or Easy Ironing.

Start Delay Function

Details on how to set a delayed start for the washing machine.

Programme Start

Steps to initiate the selected wash programme after setup.

Cancel Running Programme

Procedure to stop and drain a programme before its completion.

Understanding Indicators and End of Cycle

Red Indicators

Explanation of specific indicator lights like 'Service' and 'Clean Pump'.

Programme End

Signifies the completion of a wash cycle and door unlocking.

Changing Programme;Options

How to modify programme or options after the cycle has started.

Summary

Automatic Safety Functions

Service Indicator

Indicates a fault in an electrical component, refer to troubleshooting guide.

Clean Pump Indicator

Water not pumped out; check drain hose or filter for blockages.

Water Tap Closed Indicator

Insufficient water supply; ensure water tap is open.

Door Lock Indicator

Door not properly closed; attempt to close it again.

Programme Chart Controls

Programme Selector

Used to select the desired wash programme for the laundry.

Start Button

Initiates or pauses the selected wash programme.

Variable Spin Button

Allows adjustment of the spin speed for the programme.

Programme Sequence Indicator

Displays the current stage of the running wash programme.

Start Delay Button

Enables programming a delayed start time for the wash cycle.

Optional Function Buttons

Activates additional features or options for the wash cycle.

Programme Selection and Operation

Add Detergents and Select Programme

Instructions for adding detergent and choosing a wash programme.

Select Any Desired Option

Guides on activating optional functions like Prewash or Easy Ironing.

Start Delay Function

Details on how to set a delayed start for the washing machine.

Programme Start

Steps to initiate the selected wash programme after setup.

Cancel Running Programme

Procedure to stop and drain a programme before its completion.

Understanding Indicators and End of Cycle

Red Indicators

Explanation of specific indicator lights like 'Service' and 'Clean Pump'.

Programme End

Signifies the completion of a wash cycle and door unlocking.

Changing Programme;Options

How to modify programme or options after the cycle has started.

Whirlpool AWG 908 E Specifications

General IconGeneral
BrandWhirlpool
ModelAWG 908 E
CategoryWasher
LanguageEnglish

Related product manuals