EasyManua.ls Logo

Whirlpool AWO/C M8123/1 S - User Manual

Whirlpool AWO/C M8123/1 S
36 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Gebrauchsanweisung
Instructions for use
Mode d’emploi
Gebruiksaanwijzing
Istruzioni per l’uso
Brugsanvisning
Bruksanvisning
Käyttöohje
Manual de utilização
Instrucciones para el uso
Instrukcje użytkowania
Használati utasítás
ИнструкциЯ за употреба
Návod k použití
Návod na použitie
Instruc∑iuni de utilizare
Инструкции по эксплуатации
Қолдану бойынша нұсқаулық
Інструкція з експлуатації

Table of Contents

Questions and Answers

  • M
    Matthew MckenzieAug 20, 2025
    How to fix a Whirlpool AWO/C M8123/1 S that won't start and has no lights?
    • M
      Michael MartinAug 20, 2025
      If your Whirlpool Washer doesn't start and no indicators are lit, ensure the plug is correctly inserted into the socket. Test the socket and fuse with a working appliance like a table lamp. Also, the washer might have automatically switched off to save energy. To turn it back on, first turn the program selector to “Off/O” and then select your desired program again.
  • J
    Jerry BrownAug 22, 2025
    Why won't my Whirlpool Washer start after pressing start pause?
    • N
      nstevensAug 22, 2025
      If your Whirlpool Washer doesn't start even after pressing “Start(Pause)”, make sure the door is fully closed. Another possibility is that the “Child lock/Lock buttons” feature is active. If your model has this, unlock the buttons by pressing and holding the two buttons marked with the key symbol simultaneously for at least 3 seconds, until the key symbol disappears from the display. Then, you should be able to start the program.
  • T
    Timothy DuncanAug 25, 2025
    How to stop my Whirlpool Washer from vibrating during the spin cycle?
    • K
      katherine88Aug 25, 2025
      If your Whirlpool Washer vibrates excessively during the spin cycle, ensure that the transport bolts have been removed from the back of the machine. These bolts are essential for shipping and must be taken out before use. Also, check if the appliance is level and standing firmly on all four feet. Refer to the Installation Guide for instructions on leveling the machine.
  • T
    Tracy JohnsonAug 26, 2025
    What does 'Clean pump' mean on a Whirlpool AWO/C M8123/1 S Washer and how do I fix it?
    • J
      Javier MosleyAug 26, 2025
      If your Whirlpool Washer displays the “Clean pump” message, it means the waste water isn't being pumped out. Unplug the appliance and check the drain hose for kinks or blockages. Also, inspect the filter and pump for any obstructions, ensuring the water has cooled before draining the appliance. If the drain hose is frozen, thaw it out. After resolving the issue, press the “Reset” button for at least 3 seconds and restart the desired program. If the fault persists, contact After-Sales-Service.
  • D
    donovanjulieAug 28, 2025
    Why is my Whirlpool AWO/C M8123/1 S unbalanced during the spin cycle?
    • C
      Chris JosephAug 28, 2025
      If your Whirlpool Washer experiences unbalance during spinning, it's likely due to an uneven distribution of laundry. This prevents the spin phase to avoid damage, leaving the laundry very wet. Small loads with only a few large or absorbent items (like towels) or big/heavy items can cause this. Avoid small laundry loads if possible. When washing a big or heavy item, add other laundry items of different sizes. To spin the wet laundry, add more items and then select and start the “Rinse & Spin” program.
  • J
    Jim RichardsonAug 30, 2025
    Why are there detergent residues on my laundry after washing in my Whirlpool AWO/C M8123/1 S?
    • R
      Richard DuranAug 30, 2025
      If you find whitish detergent residues on your laundry after washing with your Whirlpool Washer, especially on dark fabrics, it's likely due to insoluble compounds in phosphate-free powder detergents. To resolve this, avoid using too much detergent, switch to liquid detergent, and select the “Intensive Rinse” option if available. You can also brush out the fabric after washing.
  • C
    Carl BakerSep 1, 2025
    What to do if my Whirlpool Washer stops during the program and the start pause indicator is blinking?
    • B
      Brandon JonesSep 1, 2025
      If your Whirlpool Washer stops mid-cycle and the Start/Pause light blinks, it could be due to several reasons. The Rinse Hold function might be activated; press Start/Pause to proceed to spin. You may have inadvertently changed the program; reselect your desired program and press Start/Pause. The door might have been opened; close it and press Start/Pause. The appliance's safety system could be activated. Also, check that the water tap is open and the inlet hose isn't kinked or blocked, especially if the 'Water tap closed' indicator is blinking.
  • D
    Deanna WebsterSep 3, 2025
    What does 'Water tap closed' mean on my Whirlpool Washer?
    • D
      Dustin LucasSep 3, 2025
      If your Whirlpool Washer displays the “Water tap closed” message, it means the appliance isn't getting enough water. Ensure the water tap is fully open and that the water supply pressure is adequate. Check the water inlet hose for any kinks. Also, inspect the mesh filter of the water inlet hose for blockages. If the water hose is frozen or the safety valve inspection window of your water inlet hose is red, address these issues accordingly. After resolving the problem, press “Start(Pause)” to restart the program. If the fault persists, contact After-Sales Service.
  • L
    Lucas JonesSep 5, 2025
    Why are the spin results poor on my Whirlpool AWO/C M8123/1 S?
    • I
      iarroyoSep 5, 2025
      If your Whirlpool Washer's final spin results are poor, it could be due to an unbalance during spinning, which prevents the spin phase to protect the machine. Excessive foam formation can also prevent spinning; in this case, select and start the “Rinse & Spin” program and avoid using too much detergent in the future. Additionally, check if the “Spin” button has been accidentally set to a low spin speed.
  • A
    Anthony RobinsonSep 7, 2025
    Why is the Whirlpool AWO/C M8123/1 S program duration longer or shorter than indicated?
    • B
      Benjamin OrtizSep 7, 2025
      The duration of a Whirlpool Washer program can vary due to factors like excessive foam, load unbalance, or low inlet water temperature. The washer adapts the program duration to the wash load size. The duration is recalculated and updated during the program, with an animation on the display (if available). For small loads, the program time may be reduced by up to 50%.

Whirlpool AWO/C M8123/1 S Specifications

General IconGeneral
TypeFreestanding
Loading typeFront
Capacity8 kg
Spin Speed1200 RPM
Energy Efficiency ClassA+++
ColorWhite
Delay StartYes
Child LockYes
ProgramsCotton, Synthetics, Delicates, Wool

Related product manuals