Whirlpool AZB 7570 User Manual (English)

Questions and Answers:

N
Natasha ThomasJul 31, 2025
Why is my Whirlpool AZB 7570 taking so long to dry?
- S
  Stephanie HarrisJul 31, 2025
  If your Whirlpool Dryer is taking too long to dry or your laundry isn't dry enough, first ensure you've selected the correct program. Check if your laundry is excessively wet due to a washing machine spin speed lower than 1000 rpm, which might also cause a water container fault. Also, a clogged lint filter, which might be indicated by the filter indicator lamp, can extend drying times. Make sure the heat exchanger is clean. High ambient temperature can also affect drying performance. Confirm that the END indicator lamps are on, signaling the cycle's completion. If you've selected the ‘Gentle’ option, remember it’s best for small loads. Finally, separate mixed laundry loads like cotton and synthetics for optimal drying.
S
Stacey SantiagoAug 7, 2025
What to do if my Whirlpool Dryer does not start?
- L
  lnealAug 7, 2025
  If your Whirlpool Dryer isn't operating, make sure the plug connector is properly inserted into the mains electricity socket and check for a power failure or a blown fuse. Verify that the dryer door is completely closed and that you've selected a drying program. Also, check if the start delay option is activated or if the “Start (Pause)” button needs to be pressed. Finally, confirm that the indicator lamps are lighting up.
F
Frances SotoAug 15, 2025
How to turn off the lint filter light on my Whirlpool Dryer?
- E
  Emily FarmerAug 15, 2025
  If the lint filter, water container, or heat exchanger indicator lamp is on in your Whirlpool Dryer, ensure the lint filter is clean. Verify that the water container is empty and correctly positioned. Also, check that the heat exchanger is clean and correctly positioned.
P
pchurchAug 23, 2025
Why is my Whirlpool AZB 7570 Dryer leaking water?
- W
  weaverbethAug 23, 2025
  If you find water droplets underneath your Whirlpool Dryer, make sure the heat exchanger and water container are correctly positioned. Ensure all lint is removed from the heat exchanger and door seals. Finally, check that the dryer is level.

Whirlpool AZB 7570 Specifications

General

Water consumption per cycle	- L
Energy consumption washing per cycle	3.92 kWh
Cord length	1.5 m
Loading type	Front-load
Product color	White
Built-in display	No
Appliance placement	Freestanding
Drum capacity	7 kg
Maximum spin speed	1400 RPM
Delayed start timer	Yes
Number of washing programs	-
Package depth	666 mm
Package width	640 mm
Package height	875 mm
Package weight	42000 g