Whirlpool Cabrio WTW7000DW3 User Manual (English)

Questions and Answers:

J
Jeffrey BergAug 25, 2025
How to fix vibration or off-balance issue in my Whirlpool Cabrio WTW7000DW3?
- R
  ryanschmidtAug 25, 2025
  To address vibration or off-balance issues with your Whirlpool Washer: * Ensure the front and rear feet are in firm contact with the floor and locked. The washer must be level to operate properly. * Check the floor for flexing or sagging. If the flooring is uneven, placing a ¾" (19 mm) piece of plywood under the washer can reduce sound. * See “Level the Washer” in the Installation Instructions.
S
sherriyoungAug 30, 2025
Why is my Whirlpool Cabrio WTW7000DW3 vibrating during spinning or stopped?
- R
  rickyfranklinAug 30, 2025
  If your Whirlpool Washer is vibrating during spinning or has stopped, it could be due to an unbalanced load. Load items in loose heaps evenly around the washplate. Avoid adding wet items to the washer or adding more water to the basket, as this could unbalance the washer. Avoid washing single items; balance a single item with a few extra items. If the dial is flashing, redistribute the load, close the lid, and touch and hold the Start/ Pause button. Use the Bulky/Sheets and Deep Water cycle for oversized, non-absorbent items such as comforters or poly-filled jackets. Ensure the item or load is suitable for the selected cycle.
K
kenneth06Aug 31, 2025
Why is my Whirlpool Cabrio WTW7000DW3 not cleaning or removing stains effectively?
- R
  Ryan BellSep 1, 2025
  If your Whirlpool Washer isn't cleaning or removing stains effectively, it could be because the wash load isn't completely covered in water; the washer senses the load size and adds the correct amount of water. Do not add more water to the washer because adding water lifts the items off the washplate, resulting in less effective cleaning. Also, ensure that you load items in loose heaps evenly around the washplate and add only 1 or 2 additional items after the washer has started.
G
Gabriel RollinsSep 3, 2025
What does off balance mean on my Whirlpool Cabrio WTW7000DW3?
- M
  megan51Sep 3, 2025
  Off balance on your Whirlpool Washer means that the load is not balanced or evenly distributed around the basket. The cycle is paused, as indicated by the flashing Start/Pause indicator. Open the lid, redistribute the load, and close the lid. Touch and hold the Start/Pause button to resume.
M
Michael RussellSep 5, 2025
Why is my Whirlpool Cabrio WTW7000DW3 Washer making clicking or metallic noises?
- T
  tammiehillSep 5, 2025
  Clicking or metallic noises in your Whirlpool Washer could be due to objects caught in the washer drain system. Empty pockets before washing, as loose items such as coins could fall between the basket and tub or may block the pump. It is normal to hear metal items on clothing such as metal snaps, buckles, or zippers touch against the stainless steel basket.
A
Ashley JohnsonSep 7, 2025
Why are my clothes tangling in my Whirlpool Cabrio WTW7000DW3?
- M
  matthewchapmanSep 7, 2025
  Clothes tangling in your Whirlpool Washer could be due to the washer not being loaded as recommended; load items in loose heaps evenly around the washplate. Reduce tangling by mixing types of load items and using the recommended cycle for the type of items being washed. The wash action and/or spin speed may be too fast for the load; select a cycle with a slower wash action and slower spin speed. Note that items will be wetter than when using a higher speed spin.
J
Jeremy YoderSep 9, 2025
What causes incorrect dispenser operation in my Whirlpool Cabrio WTW7000DW3?
- H
  hartsusanSep 9, 2025
  Incorrect dispenser operation in your Whirlpool Washer can be caused by clogged dispensers or laundry products dispensing too soon. Do not overfill the dispenser, as overfilling causes immediate dispensing. Load dispensers before starting a cycle. It is normal for small amounts of water to remain in the dispenser at the end of the cycle. Fabric softener thickens as it gets older, so if there is an increase of fabric softener in the dispenser after a cycle, check the age of the fabric softener and replace if needed. Homes with low water pressure may result in residual powder in the dispenser. To avoid this, select a warmer wash temperature if possible, depending on your load.

Whirlpool Cabrio WTW7000DW3 Specifications

General

Style	top load
Color	white
Washer Capacity	4.8 cubic feet
Max Spin Speed	850 revolutions per minute
Spin Speeds	3
Number of Cycles	5
Cycle Selections	mixed, casual, whites, delicates, bulky sheets
Options	extra rinse, pre soak, delay start, end beep, deep clean, utility tools
Temperature Settings	5
Temperature Selections	hot, warm, cool, cold, tap cold
Soil Levels	heavy, light, medium, normal
Internal Heater	no
Delay Start / End	yes
Child Lock	no
Cycle Signal	yes
Interior Light	no
Steam	no
Annual Energy Consumption	169 kilowatt hours
Voltage	120 volts
Current	20 amperes