Whirlpool Cabrio WTW8040DW3 User Manual (English)

Questions and Answers:

K
Kevin CollinsAug 25, 2025
How to fix vibration or off-balance issue in my Whirlpool Cabrio WTW8040DW3?
- D
  Danielle SmithAug 25, 2025
  To address vibration or off-balance issues with your Whirlpool Washer: * Ensure the front and rear feet are in firm contact with the floor and locked. The washer must be level to operate properly. * Check the floor for flexing or sagging. If the flooring is uneven, placing a ¾" (19 mm) piece of plywood under the washer can reduce sound. * See “Level the Washer” in the Installation Instructions.
R
rachelberryAug 30, 2025
Why is my Whirlpool Cabrio WTW8040DW3 Washer vibrating during spinning or stopped?
- Y
  yelliottAug 30, 2025
  If your Whirlpool Washer is vibrating during spinning or has stopped, it could be due to an unbalanced load. Load items in loose heaps evenly around the washplate. Avoid adding wet items to the washer or adding more water to the basket, as this could unbalance the washer. Avoid washing single items; balance a single item with a few extra items. If the dial is flashing, redistribute the load, close the lid, and touch and hold the Start/ Pause button. Use the Bulky/Sheets and Deep Water cycle for oversized, non-absorbent items such as comforters or poly-filled jackets. Ensure the item or load is suitable for the selected cycle.
H
howardaustinSep 1, 2025
Why is my Whirlpool Washer not cleaning or removing stains effectively?
- A
  Andrew GregorySep 1, 2025
  If your Whirlpool Washer isn't cleaning or removing stains effectively, it could be because the wash load isn't completely covered in water; the washer senses the load size and adds the correct amount of water. Do not add more water to the washer because adding water lifts the items off the washplate, resulting in less effective cleaning. Also, ensure that you load items in loose heaps evenly around the washplate and add only 1 or 2 additional items after the washer has started.
J
Jacqueline ThompsonSep 3, 2025
What does off balance mean on my Whirlpool Cabrio WTW8040DW3?
- C
  christinabonillaSep 3, 2025
  Off balance on your Whirlpool Washer means that the load is not balanced or evenly distributed around the basket. The cycle is paused, as indicated by the flashing Start/Pause indicator. Open the lid, redistribute the load, and close the lid. Touch and hold the Start/Pause button to resume.
C
Chloe WilsonSep 5, 2025
Why is my Whirlpool Washer making clicking or metallic noises?
- P
  Paul KruegerSep 5, 2025
  Clicking or metallic noises in your Whirlpool Washer could be due to objects caught in the washer drain system. Empty pockets before washing, as loose items such as coins could fall between the basket and tub or may block the pump. It is normal to hear metal items on clothing such as metal snaps, buckles, or zippers touch against the stainless steel basket.
E
Eric StanleySep 7, 2025
Why are my clothes tangling in my Whirlpool Cabrio WTW8040DW3?
- J
  jasmine20Sep 7, 2025
  Clothes tangling in your Whirlpool Washer could be due to the washer not being loaded as recommended; load items in loose heaps evenly around the washplate. Reduce tangling by mixing types of load items and using the recommended cycle for the type of items being washed. The wash action and/or spin speed may be too fast for the load; select a cycle with a slower wash action and slower spin speed. Note that items will be wetter than when using a higher speed spin.
E
Edgar GoodwinSep 9, 2025
What causes incorrect dispenser operation in my Whirlpool Washer?
- A
  ariosSep 9, 2025
  Incorrect dispenser operation in your Whirlpool Washer can be caused by clogged dispensers or laundry products dispensing too soon. Do not overfill the dispenser, as overfilling causes immediate dispensing. Load dispensers before starting a cycle. It is normal for small amounts of water to remain in the dispenser at the end of the cycle. Fabric softener thickens as it gets older, so if there is an increase of fabric softener in the dispenser after a cycle, check the age of the fabric softener and replace if needed. Homes with low water pressure may result in residual powder in the dispenser. To avoid this, select a warmer wash temperature if possible, depending on your load.

Whirlpool Cabrio WTW8040DW3 Specifications

General

Brand	Whirlpool
Model	WTW8040DW3
Type	Top Load Washer
Color	White
Control Type	Electronic
Number of Wash Cycles	12
Energy Star Certified	Yes
Voltage	120V
Agitator Type	Impeller
Warranty	1 Year Limited
Spin Speed	700 RPM
Steam Function	No

Summary

Washer Safety

Safety Alert Symbol and Warnings

Explains the safety alert symbol, DANGER, and WARNING messages.

Important Safety Instructions

What's New Under the Lid?

Cleaning with Less Water

Describes the low-water washplate system and automatic water level adjustment.

Automatic Load Size Sensing

Explains how the washer senses load size to determine the correct water level.

Choosing the Right Detergent

Advises using High Efficiency (HE) detergents for optimal performance and avoiding suds issues.

Improved Cleaning

Details how low-water washing provides concentrated cleaning and effective soil removal.

Normal Sounds You Can Expect

Describes typical operating sounds during different stages of the wash cycle.

Control Panel Overview

Power Button Functionality

Instructions for turning the washer on/off and canceling cycles.

Selecting Wash and How-to-Wash Cycles

Guide to selecting the appropriate wash cycle based on load type and method.

Start/Pause Button Operation

How to start, pause, and resume wash cycles.

Understanding the LED Time/Status Display

Explains the display for estimated time remaining and cycle status.

Control Panel Options and Modifiers

Available Cycle Options

Details available options like Delay Start, End Beep, Steam Clean, and Deep Clean.

Cycle Modifier Settings

Explains how to adjust Temperature, Soil Level, and Spin Speed for cycles.

Lid Lock Indicator Function

Information on the lid lock status and how to unlock the lid.

Laundry Product Dispensers

Liquid Fabric Softener Dispenser Use

How to use the dispenser for liquid fabric softener.

High Efficiency Detergent Dispenser

Instructions for adding High Efficiency (HE) liquid or powder detergent.

Liquid Chlorine Bleach Dispenser

How to use the dispenser for liquid chlorine bleach.

Cycle Guide for Load Selection

Using Your Washer Safely

Laundry Sorting and Preparation Steps

Tips for sorting laundry by color, fabric type, and soil level before washing.

Adding Laundry Detergents and Additives

Guidance on adding detergents, bleach, and fabric softener.

Proper Washer Loading Techniques

Instructions on how to properly load the washer for best cleaning and to prevent tangling.

Dispenser Usage Instructions

Adding High Efficiency Detergent

Detailed instructions for using the HE detergent dispenser, including tray use.

Adding Liquid Chlorine Bleach

How to properly add liquid chlorine bleach to its dispenser.

Adding Liquid Fabric Softener

Instructions for using the fabric softener dispenser correctly.

Operating Your Washing Machine

Powering On and Initiating Cycles

Steps to turn on the washer and initiate a cycle.

Selecting Load Type and Wash Method

How to choose the correct "What to Wash" and "How to Wash" settings.

Adjusting Cycle Modifiers

Guide to adjusting temperature, soil level, and spin speed for optimal wash results.

Advanced Washer Operations

Selecting Additional Cycle Options

How to add or remove options like Delay Start, Extra Rinse, and Steam Clean.

Starting and Pausing Cycles

How to start, pause, and restart the wash cycle.

Unlocking Lid to Add Items

Procedure for safely pausing and opening the lid to add missed items.

Washer Maintenance and Care

Water Inlet Hose Inspection

Recommendations for inspecting and replacing water inlet hoses.

General Washer Cleaning Tips

General advice for keeping the washer clean and performing well.

Cleaning the Washer Interior

Procedures for cleaning the washer interior using the Clean Washer cycle.

Exterior Washer Surface Cleaning

Instructions for cleaning the exterior surfaces of the washer.

Washer Storage and Reinstallation

Non-Use and Vacation Care Procedures

Steps to take when the washer will not be used for a period.

Dispenser Drawer Cleaning

A step-by-step guide for cleaning the detergent dispenser drawer.

Transporting and Winter Storage Guidelines

Instructions for preparing the washer for moving or winter storage.

Reinstallation After Storage

Steps to follow after the washer has been stored or moved.

Troubleshooting Common Issues

Washer Vibration and Stability

Solutions for washer instability and movement during operation.

Understanding Washer Noises

Explains normal operating sounds and potential causes of unusual noises.

Addressing Water Leaks

Checks for proper installation and troubleshooting steps for water leaks.

Washer Performance Problems

Addresses issues like insufficient water or incorrect water levels.

Troubleshooting Washer Operation

Washer Fails to Start or Fill

Solutions for when the washer fails to start or receive water.

Drainage and Spinning Issues

Troubleshooting steps for issues with draining or spinning cycles.

Troubleshooting Wash Cycle Results

Drainage and Spinning Problems (Continued)

Further solutions for draining and spinning problems, including load balance and detergent use.

Incorrect Wash/Rinse Temperature Issues

Addresses issues related to wash and rinse water temperature settings.

Inadequate Load Rinsing

Solutions for loads that may not be adequately rinsed.

Handling Loads with Residue

Tips for handling loads with specific types of residue like sand, lint, or pet hair.

Preventing Laundry Tangling

How to prevent and resolve laundry tangling during cycles.

Improving Stain Removal

Solutions for improving stain removal performance.

Troubleshooting Wash Performance Issues

Stain Removal and Cleaning Effectiveness

Further advice on improving cleaning and stain removal with HE detergent and cycles.

Eliminating Washer Odors

Recommendations for preventing and eliminating odors in the washer.

Preventing Fabric Damage

Causes and solutions for fabric damage during washing.

Troubleshooting Error Codes and Malfunctions

Dispenser and Detergent Issues

Solutions for dispenser malfunctions and detergent dissolving problems.

Understanding Error Code Displays

Explanations and solutions for various error codes displayed on the washer.

Whirlpool Limited Warranty Information

How to Obtain Warranty Service

Steps to take and information needed when requesting warranty service.

Warranty Coverage and Exclusions

What is covered and not covered under the limited warranty.

Warranty Legal Disclaimers

Legal disclaimers regarding implied warranties and incidental damages.

Product Assistance and Service Contact

Ordering Replacement Parts and Accessories

Information on where to find and order FSP® parts and accessories.

Whirlpool Consultant Support

How to contact Whirlpool for product assistance and support.

Related product manuals

Whirlpool cabrio WTW8000DW

44 pages

Whirlpool Cabrio WTW8500DC

84 pages

Whirlpool Cabrio WTW8700EC

28 pages

Whirlpool Cabrio WTW8500DW

84 pages

Whirlpool Cabrio WTW8200YW0

80 pages

Whirlpool Cabrio WTW8800YC0

40 pages

Whirlpool WTW8500DR Cabrio

44 pages

Whirlpool Cabrio WTW6200S

84 pages

Whirlpool Cabrio WTW5600XW3

36 pages

Whirlpool CABRIO WTW6800WE1

40 pages

Whirlpool Cabrio WTW8040DW3 User Manual

Table of Contents

Questions and Answers:

Whirlpool Cabrio WTW8040DW3 Specifications

Summary

Washer Safety

Safety Alert Symbol and Warnings

Important Safety Instructions

What's New Under the Lid?

Cleaning with Less Water

Automatic Load Size Sensing

Choosing the Right Detergent

Improved Cleaning

Normal Sounds You Can Expect

Control Panel Overview

Power Button Functionality

Selecting Wash and How-to-Wash Cycles

Start/Pause Button Operation

Understanding the LED Time/Status Display

Control Panel Options and Modifiers

Available Cycle Options

Cycle Modifier Settings

Lid Lock Indicator Function

Laundry Product Dispensers

Liquid Fabric Softener Dispenser Use

High Efficiency Detergent Dispenser

Liquid Chlorine Bleach Dispenser

Cycle Guide for Load Selection

Using Your Washer Safely

Laundry Sorting and Preparation Steps

Adding Laundry Detergents and Additives

Proper Washer Loading Techniques

Dispenser Usage Instructions

Adding High Efficiency Detergent

Adding Liquid Chlorine Bleach

Adding Liquid Fabric Softener

Operating Your Washing Machine

Powering On and Initiating Cycles

Selecting Load Type and Wash Method

Adjusting Cycle Modifiers

Advanced Washer Operations

Selecting Additional Cycle Options

Starting and Pausing Cycles

Unlocking Lid to Add Items

Washer Maintenance and Care

Water Inlet Hose Inspection

General Washer Cleaning Tips

Cleaning the Washer Interior

Exterior Washer Surface Cleaning

Washer Storage and Reinstallation

Non-Use and Vacation Care Procedures

Dispenser Drawer Cleaning

Transporting and Winter Storage Guidelines

Reinstallation After Storage

Troubleshooting Common Issues

Washer Vibration and Stability

Understanding Washer Noises

Addressing Water Leaks

Washer Performance Problems

Troubleshooting Washer Operation

Washer Fails to Start or Fill

Drainage and Spinning Issues

Troubleshooting Wash Cycle Results

Drainage and Spinning Problems (Continued)

Incorrect Wash/Rinse Temperature Issues

Inadequate Load Rinsing

Handling Loads with Residue

Preventing Laundry Tangling

Improving Stain Removal

Troubleshooting Wash Performance Issues

Stain Removal and Cleaning Effectiveness

Eliminating Washer Odors

Preventing Fabric Damage

Troubleshooting Error Codes and Malfunctions

Dispenser and Detergent Issues

Understanding Error Code Displays

Whirlpool Limited Warranty Information

How to Obtain Warranty Service

Warranty Coverage and Exclusions

Warranty Legal Disclaimers