To Next PageTo Next Page
Need help?Do you have a question about the Whirlpool Commercial Dryer and is the answer not in the manual?
General| Frequency | 60 Hz |
|---|---|
| Brand | Whirlpool |
| Heating Element | Electric |
| Voltage | 240V |
| Fuel Type | Electric |
| Dry Cycles | Multiple |
| Type | Commercial |
| Amperage | 30A |
| Number of Cycles | Multiple |
| Number of Temperature Settings | Multiple |
| Height | 42 inches |
Covers hazard symbols, DANGER, WARNING, and fire risks.
What to do if you smell gas and specific state requirements.
General precautions for dryer operation and installation.
Lists all necessary tools for setting up the dryer.
Lists components supplied with the dryer unit.
Provides measurements for 29" and 27" models.
Specifies required clearances around the dryer.
Guidelines for basement, laundry room, or recessed areas.
Specific requirements for confined spaces.
Essential grounding steps for gas dryers.
Information on gas type, lines, and codes.
Overview of 3-wire, 4-wire, power cord, direct wire.
Mandatory grounding for electric dryers.
Requirements for cords and compatible outlets.
Requirements for hardwiring the dryer.
Approved vent types and installation methods.
Types of exhaust hoods and vent length limits.
Step-by-step guide for vent connection.
Venting strategies for multiple dryers.
Step-by-step instructions for gas hookup.
Recommended methods for gas supply lines.
Procedure for attaching and adjusting leveling legs.
Steps to install coin slide and coin box.
Installing the security bolt and cone.
Installing strain relief for cords/conduit.
Covers 3-wire and 4-wire power cord installation.
Covers 3-wire and 4-wire direct wire installation.
Specific steps for optional 3-wire setups.
How to ensure the dryer is level using legs.
Finalizing leg adjustments and jam nut tightening.
Verifying electrical, parts, tools, and packaging.
Running a test cycle and checking for heat.
Steps to install 30- or 60-minute cams.
Cleaning lint screen, cabinet, vent, and area.
Information for getting help.
