To replace the covers:
1. Replace metal cover support on wall supports
in front section of cabinet.
2. Fii back corners of cover frame into notched
supports on liner walls, then lower front of
cover frame into place.
3. Slide back of glass insert into place, then
lower front.
Adjusting the crisper humidity control
You can control the amount of humidity in the
moisture-sealed crisper.
l
The control can be adjusted to any setting
between LOW and HIGH.
l
LOW (open) lets moist air out of the crisper for
best storage of fruits and vegetables with skins.
l
HIGH (closed) keeps moist air in the crisper for
best storage of fresh, leafy vegetables.
Adjusting the meat drawer temperature
Cold air flows against the meat drawer through
an opening between the freezer and the refrig-
erator. This helps keep the meat drawer colder
than the rest of the refrigerator for better storage
of meats.
Use control to
adjust
meat drawer tsmperatura
Slide the control to let more or less cold air
through.
Removing the snack bin
To remOve the snack bin:
1. Slide snack bin straight out to the stop with an
even, constant motion.
2. Lift the front.
3. Slide bin out the rest of the way.
4. Replace in reverse order.
Pull out to Ihe
stop, lift the front
and pull again.
10
To Next Page
Loading...
