EasyManua.ls Logo

Whirlpool ET16XK - Changing the Light Bulb; Reversing the Door Swing

Whirlpool ET16XK
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
U& nr$ Refrigerator
B
Changlng the light bulb
Before removlng a light bulb, either unplug
the refrigerator or dlaconnect the electrl~
tty leading to the refrigerator at the maln
To change refrigerator Ilght:
1. Disconnect refrigerator from power supply.
2. Reach behind control console to find bulb.
3. Remove bulb and replace with a 40-watt
appliance bulb.
4. Reconnect refrigerator to power supply.
NOTE: Not all appliance bulbs will fit your
refrigerator. Be sure to replace bulb with one of
the same size and shape.
Reversing the door swlng
You can change the hinges on your refrigerator
so the doors open the other way. Refer to the
instruction sheet included with your refrigerator.
Ice cube trays
lf cubes are not used, they may shrink. The
moving cold air starts a slow evaporation. The
bnger cubes are stored, the smaller they get.
To remove ice:
1. Hold tray at both ends.
2. Twist slightly.
6

Related product manuals