Whirlpool ET18DK - Managing Exterior Moisture; Adjusting Temperature Settings

Exterior moisture control
The Exterior Moisture Control operates
electric heaters around the door openings.
These heaters help keep moisture from
forming on the outside of the refrigerator
cabinet.
l Use the OFF setting when humidii is low.
l Use the ON setting if moisture forms on
the outside of the refrigerator cabinet.
Ex-mmYolsnREcalRa
-ml
011
Changing the control settings
If you need to adjust temperatures in
refrigerator or freezer, use the settings listed
in the chart below as a guide. If you have
questions, cell our Consumer Assistance
Center number, 1-800-253-l 301.
l Adjust the Refrigerator Control first.
l Waft at least 24 hours between adjust-
ments.
l Then adjust the Freezer Control if needed.
CONDlTION:
Refrigerator
section
too warm
Freezer
section
too warm
REASON:
l Door opened often
l Large amount of food added
l Room temperature too warm
l Door opened often
l Large amount of food added
l Very cold room temperature
(can’t cycle often enough)
RECOMMENDED
CONTROL SElTlNGS:
Refrigerator 4
Freezer
A
Refrigerator 3
Freezer
C
Refrigerator
section
too cold
l Controls not set correctly
Refrigerator 2
for your conditions
Freezer
6
Ice not
made fast
enough
60th
sections
too warm
l Heavy ice usage
l Very cold room temperature
(can’t cycle often enough)
l Door opened often
l Large amount of food added
l Very warm or very cold room
temperatures
Refrigerator 3
Freezer
C
Refrigerator 4
Freezer
B
8