SERVICE
Whirlpool Europe FL 5105/A 05.10.2004 / Page 3
Customer Service 8570 510 10780 Doc. No: 4812 722 23294
Technical data
Drain pump (synchronous)
Type 72735
Nominal Voltage 230 V
Nominal/max. current 0.3/0.5 A
Rotation speed 3000 rpm
Nominal power 34 W
Frequency 50 Hz
Resistor (coil) (20 ˚C) 155 Ω
Capacity (0.55 - 1.0 m) 14 ± 2 l/min
Program timer
Type AA1
Timer basic 4619 710 73371
Timer programmed 4619 751 53041
Program 32 positions
Motor
Type MCA 38/64-148/WHE 3
Belt ratio i = 1:15.9
Resistance contacts (20 ˚C)
Stator (full field) 2.04 Ω ± 7%
Rotor 2.25 Ω ± 7%
Tachogenerator 68.70 Ω ± 7%
Input power (230 V AC)
Washing 190 W ± 7%
Rinsing 260 W ± 7%
Spinning 360 W ± 10%
Radio interference filter
Rated voltage 250 V
Rated current 16 A
Frequency 50/60 Hz
Nominal capacity 240/250nFX1+2x22nFY
± 20%
Nominal resistance 1 MΩ± 5%
Derivation current
(u = 250 V AC) ≤ 4.15 (2 x 2.075) mA
Main switch
Type 1DLF1006
Nominal voltage 250 V
Nominal current 16 (5) A
Poles 2
Functionality Normally opened
Connection in RAST 5 6.3 pins
Connection lamp 2.8 pins
Option switch
Nominal voltage 5 V DC
Nominal current 1 mA
Poles 1
Functionality Normally opened
Connection RAST 2.5
Temperature/spin speed selector
Type 04-0084.0006
Positions 7
Nominal voltage 5 V DC
Nominal current 1 mA
Poles 1
Connection RAST 2.5
Value of resistors ± 5%:
5 - 6 pos.1 <10 Ω
«-» pos.2 0.68 kΩ
«-» pos.3 1.10 kΩ
«-» pos.4 1.80 kΩ
«-» pos.5 2.70 kΩ
«-» pos.6 3.60 kΩ
«-» pos.7 4.70 kΩ
Push button switch
ON/OFF SM
Eco OPT. 1
Rapid OPT. 2
Intensive rinse OPT. 3
Rinse hold OPT. 4