EasyManua.ls Logo

Whirlpool FSCR12441 - Cleaning the Detergent Dispenser

Whirlpool FSCR12441
64 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
45
EN
CLEANING THE DETERGENT
DISPENSER
1.
Remove the detergent dispenser by pressing
down the release button and pulling out the
detergent dispenser.
1
2
Softener
2. Carefully remove the cover from the detergent
dispenser. While removing it, take care of the
functional parts on the bottom side of the cover.
Softener
3. OPTIONAL: If a tank still contains a good
quantity of detergent or fabric softener, this can
be collected for reuse. The two rubber stoppers
on the rear bottom of the detergent dispenser are
removable. If needed, remove the stopper and
collect the escaping detergent or fabric softener in
a container.
4. Carefully clean the parts under running water,
removing detergent or fabric softener residues.
Particularly take care not to damage the functional
parts on the reverse of the tank cover.
5. Wipe the parts dry with a soft cloth.
6. Only if you have removed the rubber stoppers
to empty the tank content (step 3): Plug in the
rubber stoppers again. Make sure that they are
completely plugged in, to avoid that detergent
can escape accidentally.

Related product manuals