1) HEATING Function - Quick Heat
HEATING Function - High / Low
2)VENT Function - Super
Press the “Heat” button, the LCD displays “Heat” function icon, air volume will run the mode
of “High” mode. Press the button again to select the “Hi” or “Lo mode.
Timer: the default time is 2 hours. By pressing “Timer” up or down button to select time
duration. The time can be set from 15 minutes to 24 hours. The time counter will be
displayed on the LCD. The time selected will be recorded in memory when it is off, and will
resume in your next usage.
Under the mode, the inter-change of the air volume between “High” or “Low” will not affect the
time counting.
Stop: when press the “Stop” button or pre-set time runs over, the LCD “Heat” and time display
would disappear, and the product will stop automatically.
When the heater stops running, the fan will continues runs for around 25 seconds to
cool down the heater.
Press the “Super Vent” button, the LCD will display “Vent” icon, air volume will run
the “Super Vent” mode.
Timer: the default time is 2 hours. By pressing “Timer” up or down button to select time
duration. The time can be set from 15 minutes to 24 hours. The time counter will be
displayed on the LCD. The time selected will be recorded in memory when it is off, and
will resume in your next usage.
Stop: when press the “Stop” button or the pre-set time runs over, the LCD “Vent”
time display would disappear, and the product will stop automatically.
and the
VENT Function - High / Low
Press the “Vent” button, the LCD will display “Vent” icon, air volume will run the “High” mode.
Press the button again to inter-change the “Hi” or “Lo” mode.
Timer: the default time is 2 hours. By pressing “Timer” up or down button to select time
duration. The time can be set from 15 minutes to 24 hours. The time counter will be
displayed on the LCD. The time selected will be recorded in memory when it is off, and will
resume in your next usage.
Under the mode, the inter-change of the air volume between “High” or “Low” will not affect
the time counting.
Stop: when press the “Stop” button or the pre-set time runs over, the LCD “Vent” and the time
display would disappear, and the product will stop automatically.
When the heater stops running, the fan will continues runs for around 25 seconds to cool
down the heater.
【Function Descriptions】
-12-
Press the “Quick Heat” button, then the LCD displays the “Quick Heat” function icon,
air volume will run the mode of “Super”.
Timer: the default time is 2 hours. By pressing “Timer” up or down button to select
time duration. The time can be set from 15 minutes to 24 hours. The time counter
will be displayed on the LCD. The time selected will be recorded in memory when
it is off, and will resume in your next usage.
Stop: when press the “Stop” button or pre-set time runs over, the LCD “Quick Heat”
and time display would disappear, and the product will stop automatically.
When the heater stops running, the fan will continues runs for around 25 seconds to
cool down the heater.
To Next Page
Loading...
