Cycle signals
There are two cycle signals that sound
signals as an operating convenience.
The end of cycle signal beeps 5
times at the end of a wash cycle. This
tells you the wash is done and the load
can be removed.
The deep rinse signal beeps once at
the beginning of the deep rinse portion
of the cycle. This tells you the washer is
filling for the final rinse.
To cancel both signals, touch the
CYCLE SIGNAL Pad. The Cycle Signal
Indicator Light
will
go off. This tells you
the signals are turned off.
MAGIC CLEAN” lint filter
The lint filter in your washer cleans
itself. Collected lint is drained away with
the wash and rinse water.
If your washer drains into a tub,
remove any linl collected in the drain or
strainer.
To Next Page
Loading...
