1
. Select a CYCLE
Turn the Control Knob either way to
point to the cycle and setting you
want. See page 6 for information on
the cycles.
3
. Push the START Button
2
Set
.
TEMPERATURE SELECTOR
Turn the Temperature Selector to the
needed drying temperature
To stop and restart
the dryer
The dryer will start tumbling when you
push the START Button.
To stop
the dryer, open the door (or
turn the Control Knob to OFF).
To restart
the dryer, close the door,
select cycle, if necessary, and push
START.
The Cycle Control Knob should point to OFF when the dryer is not in use.
I? the dryer is stopped before the cycle is finished, turn the Cycle Control
Knob to OFF.
5
To Next Page
Loading...
