Mixed loads
When drying a load with different
kinds and weights of fabrics, use the
cycle suggested for the lightest
fabrics. When the dryer stops, remove
dry items and reset the control.
To reduce wrinkling, take the load
from dryer as soon as tumbling stops.
This is important for permanent press,
knits and synthetic fabrics.
Drying times
Drying times will vary depending on
l
amount of moisture in the clothes
l
type and weight of the fabric
l
size of the load.
l
room temperature around the
dryer.
l
temperature of the wash rinse
water.
l
amount of lint in the lint screen
l
dryer temperature selection
See your “Dryer Guide” for
more information
Clean the lint screen before each load. If you
neglect to clean your lint screen, the signal will
sound. The whistle tone signal lets you know the
air flow is being restricted. Restricted air flow
reduces drying efficiency.
Turn off the dryer and clean the lint screen as
shown on the next page.
To Next Page
Loading...
