4
MAIN FUNCTIONS
To remove excess
detergent,saving both
time and water.
Hand washing can
improve the washing
ability.
1.Rinse and foam-
removing spinning
2.Hand washing
Preparation before washing
Attention before washing
Follow washing instructions stated on
clothing labels.
Remove all hard objects
(eg coins,hairpins etc)
from clothings
Fasten buttons and
zippers.
Always put clothes with
buttons in the middle of the
wash load to minimise
contact with the pulsator.
When filling the water into the washing
tub,please do not leave until the water
level reaches the anticipated level,then
turn off the tap.
The quantity of Clothes
should not exceed the
rated capacity.
1.Install the water inlet hose. The max water
pressure permitted is between 0.03-0.6mpa
2.Be sure the earthing is in proper working condition
and insert the plug.The earthing should not join with
any gas pipe or water hose.
3.Lay down the drain hose.(Down drain)
4.Put up the drain hose.(Up drain)
5.Please keep machine level, otherwise it will cause
an abnormal sound.
To Next Page
Loading...
