6
WASHING SEQUENCE
1.Put the clothes into the spin tub.
2.Spin.
(1)Place the safety cover properly.
(2)Close the spin cover .
(3)Spin for 1- 2 minutes.
3.Rinse and foam-removing spin
(1)Open the spin cover.
(2)Put the water inlet house into the spin
inlet and fill water for 1 minute.
(3)Close the cover, spin for 1-2 minutes.
Midway spinning sequence
Wash inlet
Wash timer Spin timer
Program&drain selector
Spin inlet
2.Fill water
and add
dissolved
washing powder
to
the specified
level
3.Put in the clothes.
4.Select
the
program
according
to the
clothes.
5.Select
the wash
time
according
to clothes.
6.After
washing,
set the
selector to
position
"drain".
1. Put the water inlet hose
into the inlet,move the
water inlet switch to wash
side.
To Next Page
Loading...
