EasyManua.ls Logo

Whirlpool MH1170XSB - User Manual

Whirlpool MH1170XSB
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
MICROWAVE HOOD COMBINATION
INSTALLATION INSTRUCTIONS
This product is suitable for use above electric or gas cooking products up to 36" (91.4 cm) wide.
These installation instructions cover different models. The appearance of your particular model may differ slightly from the
illustration in these installation instructions.
NOTES:
Proper installation isthe responsibility of the installer.
Product failure due to improper installation is not covered under the warranty.
Table of Contents
MICROWAVEHOOD COMBINATION SAFETY ..............................J
INSTALLATIONREQUIREMENTS ...................................................2
Tools and Parts...............................................................................2
Location Requirements...................................................................2
Product Dimensions .......................................................................3
Electrical Requirements..................................................................3
INSTALLATIONINSTRUCTIONS.....................................................4
RemoveMounting Plate .................................................................4
Rotate Blower Motor.......................................................................4
LocateWall Stud(s).........................................................................6
Mark RearWall................................................................................7
Drill Holes in RearWall....................................................................7
Attach Mounting Plate to Wall........................................................8
Prepare UpperCabinet ...................................................................8
InstallDamper Assembly ................................................................9
Installthe Microwave Oven ............................................................9
Complete Installation...................................................................10
VENTING DESIGN SPECIFICATIONS...........................................11
ASSISTANCE..................................................................................12
ReplacementPar_s......................................................................12
Accessories..................................................................................12
MICROWAVE HOOD COMBINATION SAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."
These words mean:
You can be killed or seriously injured if you don't immediately
follow instructions.
You can be killed or seriously injured if you don't follow
instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
IMPORTANT: Read Installation Instructions thoroughly before beginning installation. Save Installation Instructions for local house
inspector's use.
8206555
Question and Answer IconNeed help?

Do you have a question about the Whirlpool MH1170XSB and is the answer not in the manual?

Summary

Microwave Hood Combination Safety

Installation Requirements

Tools and Parts

Lists all necessary tools and parts for the installation process.

Location Requirements

Specifies criteria for selecting a suitable installation location.

Installation Dimensions and Electrical Requirements

Installation Dimensions

Provides visual guide for required dimensions for installation.

Product Dimensions

Shows the physical size and measurements of the microwave oven.

Electrical Requirements

Covers the necessary electrical specifications and safety guidelines.

Installation Instructions

Remove Mounting Plate

Steps to detach the mounting plate from the unit.

Rotate Blower Motor

Instructions for reorienting the blower motor for venting.

Installation Instructions (cont.)

Rotate Blower Motor (cont.)

Completes blower motor rotation steps for venting.

Roof Venting Installation Only

Specific blower motor rotation for roof venting.

Installation Instructions (cont.)

Locate Wall Stud(s)

Guidance on finding and marking wall studs for mounting.

Installation Instructions (cont.)

Mark Rear Wall

Steps to mark the rear wall for mounting plate and venting.

Drill Holes in Rear Wall

Instructions for drilling holes based on wall stud configuration.

Installation Instructions (cont.)

Attach Mounting Plate to Wall

Procedures for securely attaching the mounting plate.

Prepare Upper Cabinet

Steps for preparing the upper cabinet for microwave installation.

Installation Instructions (cont.)

Install the Microwave Oven

Instructions for lifting and securing the microwave oven.

Install Damper Assembly

Steps to install the damper assembly for wall venting.

Installation Instructions (cont.)

Complete Installation

Final steps including connecting vent and power, and testing.

Venting Design Specifications

Assistance

Replacement Parts

Lists part numbers for ordering replacement components.

Accessories

Information on available accessories like filler panel kits.

Summary

Microwave Hood Combination Safety

Installation Requirements

Tools and Parts

Lists all necessary tools and parts for the installation process.

Location Requirements

Specifies criteria for selecting a suitable installation location.

Installation Dimensions and Electrical Requirements

Installation Dimensions

Provides visual guide for required dimensions for installation.

Product Dimensions

Shows the physical size and measurements of the microwave oven.

Electrical Requirements

Covers the necessary electrical specifications and safety guidelines.

Installation Instructions

Remove Mounting Plate

Steps to detach the mounting plate from the unit.

Rotate Blower Motor

Instructions for reorienting the blower motor for venting.

Installation Instructions (cont.)

Rotate Blower Motor (cont.)

Completes blower motor rotation steps for venting.

Roof Venting Installation Only

Specific blower motor rotation for roof venting.

Installation Instructions (cont.)

Locate Wall Stud(s)

Guidance on finding and marking wall studs for mounting.

Installation Instructions (cont.)

Mark Rear Wall

Steps to mark the rear wall for mounting plate and venting.

Drill Holes in Rear Wall

Instructions for drilling holes based on wall stud configuration.

Installation Instructions (cont.)

Attach Mounting Plate to Wall

Procedures for securely attaching the mounting plate.

Prepare Upper Cabinet

Steps for preparing the upper cabinet for microwave installation.

Installation Instructions (cont.)

Install the Microwave Oven

Instructions for lifting and securing the microwave oven.

Install Damper Assembly

Steps to install the damper assembly for wall venting.

Installation Instructions (cont.)

Complete Installation

Final steps including connecting vent and power, and testing.

Venting Design Specifications

Assistance

Replacement Parts

Lists part numbers for ordering replacement components.

Accessories

Information on available accessories like filler panel kits.

Whirlpool MH1170XSB Specifications

General IconGeneral
BrandWhirlpool
ModelMH1170XSB
CategoryMicrowave Oven
LanguageEnglish

Related product manuals