Whirlpool MWT25WH - CLOCK SETTING; HOW TO SET THE CLOCK; OPERATIONAL TIPS

12
GB
CLOCK
To seT The CloCk
of your appliance:
q In standby, press the Auto Clean button for 3
seconds. The display shows the current clock.
w Press + / - to set the hour.
e Press Clock/JET START button to conrm.
r Press + / - to set the minute.
t Press Clock/JET START to conrm the setting.
Every time after cooking process is completed, the
screen shows “End” and issued a prompt until ope-
ned the door to return standby (no operation for
10 minutes automatically return to standby).
• When plugged in, the screen shows“12:00” ( “12”
flashing ), 1 minute later return to standby (before
returning standby can directly set clock).
• In the process of cooking, press Stop button once
to pause, press JET START button to continue coo-
king, but press STOP twice to cancel this program.
• In the process of cooking set, no operating system
automatically return to standby mode in 1 minute.
Tips and suggestions: