SEALEDSURFACEBURNERSANDCOOl(TOP
Cleanin thesurfaceburners
• You should routinely remove and clean the burner Porcelain
cap. Always clean the burner cap after a spill-over, burner cap -----I
Keeping the burner cap clean prevents improper
ignition and an uneven flame,
l For the proper flow of gas and ignition of the
burner, do not allow spills, food, cleaning
agents, or any other material to enter the gas
tube opening.
• Gas must flow freely through the gas tube
opening for the burner to light properly. You must
keep this area free of any soil and protect it from
boilovers or spillovers. Always keep the burner
cap in place whenever a surface burner is in use.
• Let the cooktop cool before cleaning.
• Do not use oven cleaners, bleach, or rust
removers.
Burner
base _
• Do not obstruct the flow of combustion and
ventilation air.
• Be careful not to allow moisture to collect in the
control areas. Moisture can cause the ignitor
switches to fail.
• Occasionally check the burner flames for proper
---i
.fl I ,
size and shape as
shown. A good flame
is blue in color. If the
flames are uneven, you
may need to clean the
burners.
Contoured
Gas tube
opening
continued on next page
25
To Next Page
Loading...