Whirlpool WAR488BSL - Final Steps; Stand Upright and Check Alignment; Reconnect Power and Food

5
Final Steps
1. Stand the the refrigerator upright and check all holes to make
sure that hole plugs and screws are in place.
2. Check the door for aligment and for a seal against the cabinet.
3. Let stand upright for 60 minutes before reconnecting power.
4. Plug into a grounded 3 prong outlet.
5. Reset the control. See “Using the Control” section.
6. Return all removable door parts to door and food to
refrigerator.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
WARNING
A. Plastic Cap
1
A
A. Top Hinge Pin
2
Bottom Hinge
Top Hinge
A. Hinge Washer
B. Bottom Hinge Pin
C. Leveling Leg
D. Screw Washers
E. Spacers
F. Hinge Screws
3
A
A
B
C
D
E
F
B. Screw Washers
C. Spacers
D. Retaining Screws
A. Fixed Foot
4
B
C
D
A