B
brendachristensenJul 29, 2025
Why won't my Whirlpool WFW95HEDC Washer run or fill with water?
- CChristopher McdonaldJul 29, 2025
Your Whirlpool Washer might not start or fill if the door isn't completely closed and latched. Also, both the hot and cold water faucets must be turned on, with both hoses properly attached and supplying water to the inlet valve. Make sure the inlet valve screens are free from clogs and the inlet hoses aren't kinked, which could restrict water flow. The power cord should be plugged into a grounded 3-prong outlet, without using an extension cord, and the outlet must have power. Check the electrical source, and if the voltage is low, contact an electrician. Reset any tripped circuit breakers or replace blown fuses. If problems persist, it's best to consult an electrician.