EasyManua.ls Logo

Whirlpool WTW4616FW - User Manual

Whirlpool WTW4616FW
36 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
W10860701B
W10862387B-SP
Top-Loading Washer
Use and Care Guide
Table of Contents
WASHER SAFETY ...................................................................... 2
WHAT’S NEW UNDER THE LID? .............................................. 3
CONTROL PANEL AND FEATURES ......................................... 4
CYCLE GUIDE ............................................................................ 6
USING YOUR WASHER ............................................................. 7
WASHER MAINTENANCE ......................................................... 9
TROUBLESHOOTING .............................................................. 11
WARRANTY .............................................................................. 16
ASSISTANCE OR SERVICE ..................................BACK COVER
Table des matières
SÉCURITÉ DE LA LAVEUSE ................................................... 17
QUOI DE NEUF SOUS LE COUVERCLE? .............................. 18
TABLEAU DE COMMANDE ET
CARACTÉRISTIQUES .............................................................. 19
GUIDE DE PROGRAMMES ..................................................... 21
UTILISATION DE LA LAVEUSE ............................................... 22
ENTRETIEN DE LA LAVEUSE ................................................. 25
DÉPANNAGE ............................................................................ 27
GARANTIE ................................................................................ 34
ASSISTANCE OU SERVICE ............... COUVERTURE ARRIÈRE
Laveuse à chargement par le
dessus guide d’utilisation et
d’entretien
Para una versión de estas instrucciones en español, visite www.whirlpool.com

Table of Contents

Questions and Answers

  • J
    julian29Aug 18, 2025
    Why is my Whirlpool WTW4616FW vibrating or off-balance?
    • G
      Gary KleinAug 18, 2025
      Your Whirlpool Washer might be vibrating or off-balance due to several reasons: * The feet may not be in contact with the floor and locked - ensure the front and rear feet are firmly touching the floor, and the washer is level. * The washer itself may not be level - inspect the floor for flexing or sagging. Consider placing a ¾" (19 mm) piece of plywood under the washer if the flooring is uneven. * The load might be unbalanced - load dry items in loose heaps evenly around the basket wall. Avoid adding wet items or too much water, as this could unbalance the washer. * Try washing smaller loads to reduce imbalance. * Avoid tightly packing the washer and do not wash single items. * For oversized, non-absorbent items like jackets and small comforters, use the Super Heavy cycle.
  • J
    Jessica EvansAug 20, 2025
    What to do if my Whirlpool Washer is leaking water?
    • R
      rodney61Aug 21, 2025
      If your Whirlpool Washer is leaking water, consider the following: * Ensure the washer is level, as water may splash off the basket if it is not. * Check and tighten the fill-hose connections. * Verify that all four fill-hose flat washers are correctly seated. * Make sure the drain hose is properly secured to the drainpipe or laundry tub. * Do not place tape over the drain opening. * Inspect household plumbing for leaks or clogs in the sink or drain. * Ensure the washer is loaded as recommended; improper loading can cause the basket to misalign and cause water to splash.
  • S
    Samantha ClarkAug 23, 2025
    What to do if my Whirlpool WTW4616FW Washer is not draining or spinning properly?
    • J
      Justin BennettAug 23, 2025
      If your Whirlpool Washer isn't draining or spinning, and loads are still wet, consider these potential causes: * Small items may be caught in the pump or between the basket and tub, slowing draining. Empty pockets and use garment bags for small items. * Try using a cycle with a low spin speed. * The washer might be tightly packed or unbalanced. * Check the plumbing for correct drain-hose installation. * Too much detergent can cause suds, slowing or stopping draining and spinning. Always measure detergent and follow directions. To remove extra suds, select Rinse & Spin without adding detergent.
  • J
    Jessica YoungAug 26, 2025
    Why is my Whirlpool Washer so noisy?
    • M
      Mitchell AllenAug 26, 2025
      Your Whirlpool Washer might be making unusual noises due to: * Objects caught in the washer drain system. Empty pockets before washing, as loose items like coins could fall between the basket and tub or block the pump. Service may be required to remove the items. * Metal items on clothing, such as snaps, buckles, or zippers, touching the basket. * The washer draining water. The pump may make a continuous humming sound with periodic gurgling as water is removed during the Drain & Spin cycles. * Load sensing occurring. You may hear the hum of the sensing spins after starting the washer. * Basket deceleration occurring. You may hear a whirring sound as the basket decelerates.
  • M
    Matthew SmithAug 28, 2025
    Why is my Whirlpool WTW4616FW Washer load not rinsed properly?
    • E
      Eric HunterAug 28, 2025
      If your Whirlpool Washer load is not rinsed properly, check the following: * Ensure a proper water supply. Make sure the hot and cold inlet hoses are not reversed. * Both hoses must be attached and have water flowing to the inlet valve. * Both hot and cold water faucets must be on. * Using too much detergent. The suds from too much detergent can keep the washer from operating correctly. Always measure detergent and follow detergent directions based on load size and soil level. * The washer is less efficient at rinsing when tightly packed. Select the Fabric Softener option to add an extra rinse cycle.
  • C
    Christine WilsonAug 30, 2025
    Why does my Whirlpool WTW4616FW Washer smell?
    • V
      Victoria HayesAug 30, 2025
      Odors in your Whirlpool Washer can be due to: * Monthly maintenance not being performed as recommended. See 'Washer Care' in 'Washer Maintenance.' * Using too much detergent. Be sure to measure correctly and always follow the manufacturer's directions.
  • M
    Melinda YatesSep 1, 2025
    What does it mean when the locked light is flashing on my Whirlpool Washer?
    • N
      nelsoncourtneySep 1, 2025
      If the locked light is flashing on your Whirlpool Washer: * The lid is not closed. Close the lid; the washer will not start with the lid open. * A cycle was stopped or paused using the START/Stop button. The washer may still be spinning, and the lid will not unlock until the basket has stopped spinning. This may take several minutes if washing large loads or heavy fabrics.
  • R
    Ryan BerrySep 3, 2025
    Why does my Whirlpool WTW4616FW pump out water before finishing the cycle?
    • A
      Anthony JamesSep 3, 2025
      Your Whirlpool Washer might pump out water before finishing the cycle if the lid is left open for more than 10 minutes. Make sure the lid is closed before starting a cycle and/or during prewash (soak).
  • B
    Brenda OnealSep 6, 2025
    Why is my Whirlpool WTW4616FW Washer not performing as expected?
    • V
      vvargasSep 6, 2025
      If your Whirlpool Washer isn't performing as expected, consider the following: * Ensure the lid is closed for the washer to run. * The washer will pause during certain phases of the cycle; do not interrupt the cycle. * If the washer is tightly packed, remove several items, rearrange the load evenly in the basket, and add detergent. Close the lid and press START/Stop. * Avoid adding more than 1 or 2 additional items after the cycle has started to prevent tightly packing or unbalancing.
  • D
    Daniel ShepherdSep 8, 2025
    How to fix incorrect wash or rinse temperatures on my Whirlpool Washer?
    • D
      Deanna GregorySep 8, 2025
      To address incorrect wash or rinse temperatures on your Whirlpool Washer: * Check for proper water supply and ensure hot and cold inlet hoses are not reversed. * Both hoses must be attached to both the washer and faucet, with both hot and cold water flowing to the inlet valve. * Inspect the inlet-valve screens to ensure they are not clogged. * Remove any kinks in the hoses. * Note that this washer uses cooler wash and rinse water temperatures than older models, including cooler hot and warm washes, to save energy.

Summary

Washer Safety

Important Safety Instructions

Essential precautions to reduce risks of fire, electric shock, or injury when using the washer.

Control Panel and Features

Wash Temperature Selection

Guidance on selecting wash temperatures based on fabric type and soil level.

Fabric Softener Dispenser Use

Water Level Control Options

Explains how to use the Water Level knob for Auto Sensing or Deep Water Wash.

Wash Cycle Knob Operation

Start;Stop Button Functions

Details on starting, pausing, unlocking the lid, and canceling cycles.

Cycle Status Lights Explained

Using Your Washer

Sort and Prepare Laundry

Steps for sorting clothes, checking pockets, and preparing items for washing.

Add Laundry Products

Guides on measuring and adding detergent, boosters, and fabric softener.

Using Your Washer (Continued)

Load Laundry into Washer

Instructs on how to load garments loosely and evenly around the basket.

Add Bleach to Dispenser

Add Fabric Softener to Dispenser

Explains how to add fabric softener to the dispenser for proper distribution.

Select Wash Cycle

Using Your Washer (Final Steps)

Select Wash Temperature

Details how to choose wash temperatures based on fabric and soil type.

Start Wash Cycle

Explains how to start the cycle and what happens upon completion.

Troubleshooting

Vibration or Off-Balance Issues

Explains causes and solutions for washer vibration and load imbalances.

Washer Noises Explained

Identifies common noises and their probable causes and solutions.

Troubleshooting (Continued)

Water Leaks Troubleshooting

Covers potential causes and solutions for water leaks.

Washer Not Performing as Expected

Addresses issues like insufficient water or failure to start.

Troubleshooting (More Issues)

Draining or Spinning Issues

Solutions for loads not draining or spinning properly.

Dry Spots After Cycle

Incorrect Wash;Rinse Temperatures

Load Not Rinsed Properly

Troubleshooting (Common Problems)

Load Tangling Issues

Cleaning and Stain Removal

Detergent and Cycle Usage Issues

Dispenser Usage and Color Mixing

Incorrect Dispenser Operation

Troubleshooting (Advanced Issues)

Fabric Damage Issues

Washer Odors and Maintenance

Locked Light Flashing

Whirlpool WTW4616FW Specifications

General IconGeneral
Styletop load
Colorwhite
Washer Capacity3.5 cubic feet
Max Spin Speed700 revolutions per minute
Spin Speeds2
Number of Cycles6
Cycle Selectionscasual, normal, delicate, rinse & spin, clean water, drain & spin
Optionswater level, fabric softner
Temperature Settings5
Temperature Selections5
Internal Heaterno
Delay Start / Endno
Child Lockno
Interior Lightno
Smart Homeno
Annual Energy Consumption206 kilowatt hours
Voltage120 volts
Weight and Dimensions IconWeight and Dimensions
Depth27 inches
Height42 inches
Width27.5 inches

Related product manuals