Whirlpool WTW4800BQ User Manual (English)

Questions and Answers:

V
Valerie HayesAug 19, 2025
How to fix vibration or off-balance in my Whirlpool WTW4800BQ?
- J
  John AguirreAug 20, 2025
  If your Whirlpool Washer is vibrating or off-balance, it could be due to several reasons. First, ensure that the front and rear feet are firmly in contact with the floor and that the washer is level. If the flooring is uneven, placing a 3/4" (19 mm) piece of plywood underneath can help. Also, unbalanced loads can cause this issue. Load dry items in loose heaps evenly around the basket wall, and avoid adding wet items or too much water. Wash smaller loads, avoid tightly packing, and don't wash single items. For oversized items like comforters, use the Normal cycle with an Extra Large or Large load size.
A
Alison CoxAug 21, 2025
What to do if my Whirlpool WTW4800BQ Washer is leaking water?
- E
  Emily BruceAug 22, 2025
  If you notice water leaks from your Whirlpool Washer, first check if the washer is level, as this can cause water to splash off the basket. Also, ensure that the fill hoses are tightly connected. Verify that all four fill hose flat washers are properly seated. Inspect the drain hose connection, ensuring it is properly secured to the drainpipe or laundry tub, and do not place tape over the drain opening. Check your household plumbing for leaks or clogs in the sink or drain, including laundry tubs, drain pipes, water pipes, and faucets. Finally, ensure the washer is loaded as recommended, as improper loading can cause the basket to misalign and water to splash.
D
Dalton PalmerAug 23, 2025
Why is the lid locked light flashing on my Whirlpool WTW4800BQ?
- W
  wbeckAug 25, 2025
  If the lid locked light is flashing on your Whirlpool Washer, ensure that the lid is closed, as the washer will not start or fill with the lid open. If a cycle was stopped or paused using the START/Pause button, the washer may still be spinning, and the lid will not unlock until the basket has stopped spinning, which may take several minutes if washing large loads or heavy fabrics.
C
Curtis TaylorAug 27, 2025
Why is my Whirlpool WTW4800BQ making so much noise?
- C
  Cameron SantosAug 27, 2025
  If your Whirlpool Washer is making unusual noises, it could be due to several reasons. Check for objects caught in the washer drain system by emptying pockets before washing, as loose items like coins can fall between the basket and tub or block the pump (you might need to call for service to remove them). It's normal to hear metal items on clothing, such as snaps, buckles, or zippers, touching the basket. The pump may also make a continuous humming sound with periodic gurgling during the Drain & Spin cycles, which is normal. Additionally, you may hear the hum of sensing spins after starting the washer, which is also normal.
P
Paul GonzalezAug 31, 2025
Why is my Whirlpool Washer load not rinsing properly?
- G
  gdaltonSep 1, 2025
  If your Whirlpool Washer load is not rinsed properly, ensure that the hot and cold inlet hoses are not reversed and that both hoses are attached with water flowing to the inlet valve. Both hot and cold water faucets must be on. Check if the inlet valve screens on the washer are clogged and remove any kinks in the inlet hose. Using too much detergent can also prevent proper rinsing, so always measure detergent and follow directions based on load size and soil level. The washer is less efficient at rinsing when the load is tightly packed, so load garments in loose heaps evenly around the basket wall. Choose a load size (water level) that matches the load being washed.
D
Daniel HillSep 2, 2025
Why are there dry spots on my load after a Whirlpool WTW4800BQ Washer cycle?
- L
  Linda CooperSep 2, 2025
  If you find dry spots on your load after a cycle in your Whirlpool Washer, it's because the high spin speeds combined with air flow during the final spin can cause items near the top of the load to develop dry spots.
M
Melissa JonesSep 5, 2025
Why is there sand, pet hair, or lint on my load after washing in my Whirlpool WTW4800BQ?
- O
  obarkerSep 5, 2025
  If you find sand, pet hair, or lint on your load after washing in your Whirlpool Washer, it may be due to heavy sand, pet hair, lint, and detergent or bleach residues. Adding 2 Rinses to the selected cycle can help.
M
Martin PowellSep 7, 2025
Why is my Whirlpool WTW4800BQ load tangling?
- M
  Melissa RussellSep 7, 2025
  If your Whirlpool Washer load is tangling, loading garments in loose heaps evenly around the basket wall can help. Also, select a cycle with a slower wash action and spin speed, though items will be wetter. Reduce tangling by mixing types of load items and using the recommended cycle for the garments being washed.
M
Mark DouglasSep 12, 2025
Why are the wash or rinse temperatures incorrect on my Whirlpool WTW4800BQ Washer?
- I
  ilarsonSep 12, 2025
  If you are experiencing incorrect or wrong wash or rinse temperatures with your Whirlpool Washer, ensure that the hot and cold inlet hoses are not reversed. Both hoses must be attached to both the washer and faucet, allowing both hot and cold water to flow to the inlet valve. Check that the inlet valve screens are not clogged and remove any kinks in the hoses. Keep in mind that this washer uses cooler wash and rinse water temperatures than previous models, including cooler hot and warm washes.
P
Philip Harris MDSep 12, 2025
How to prevent fabric damage in my Whirlpool WTW4800BQ?
- C
  Chris ParkSep 13, 2025
  To avoid fabric damage in your Whirlpool Washer, empty pockets, zip zippers, and snap or hook fasteners before washing to prevent snags and tears. Tie all strings and straps before starting the wash load. Mend any rips and broken threads in seams before washing. Avoid tightly packing the load; instead, load garments in loose heaps evenly around the basket wall. Use the cycle designed for the fabrics being washed and add only 1 or 2 additional garments after the washer has started.

Whirlpool WTW4800BQ Specifications

General

Brand	Whirlpool
Model	WTW4800BQ
Type	Top Load Washer
Capacity	3.5 cu. ft.
Color	White
Energy Star Certified	No
Number of Wash Cycles	12
Voltage	120 V
Agitator	Yes
Wash Action	Agitator
Delay Wash	No
Quick Wash Cycle	Yes
Deep Water Wash Option	Yes
Spin Speed	660 RPM
Height	43 inches
Width	27 inches
Depth	27 in
Water Level Selection	Automatic
Weight	140 lb