Need help?Do you have a question about the Whirlpool WTW5057LW0 and is the answer not in the manual?
General| Type | Top Load |
|---|---|
| Wash Cycles | 12 |
| Spin Speed | 700 RPM |
| Energy Star Certified | No |
| Color | White |
| Control Type | Electronic |
| Steam Function | No |
| Smart Features | No |
| Brand | Whirlpool |
| Model Number | WTW5057LW0 |
| Agitator | Yes |
| Water Level Settings | 5 |
| Maximum Spin Speed | 700 RPM |
| Voltage | 120V |
Provides essential safety instructions and warnings for appliance operation and maintenance.
Details dimensions, exterior features, and internal components of the top load washer.
Explains the control panel layout, buttons, and cycle modifier options.
Defines the structure and meaning of the appliance's model number.
Shows the location of the model and serial number labels on the appliance.
Indicates where the technical service sheet is located on the appliance.
Details the steps to enter the washer's diagnostic service mode.
Explains how to interpret error codes displayed in binary format using LEDs.
Tests the user interface components, including encoder and button functionality.
Initiates an automated sequence to test various washer functions and components.
Provides a chart detailing automatic test mode steps and component activation.
Details how to view the appliance's software version and firmware information.
Describes the procedure to erase stored fault and error codes from the system.
Explains the process for calibrating the main control for optimal load size estimation.
Lists common fault codes, their descriptions, and recommended troubleshooting procedures.
Provides a systematic guide to identify and resolve common washer problems.
Details the connectors and pin assignments for the main control board.
Outlines specific tests to diagnose issues with various washer components and systems.
Illustrates the physical locations of key components within the washer.
Step-by-step guide to safely remove the washer's console assembly.
Instructions for removing the UI or encoder board assembly from the console.
Procedure for removing and replacing the water inlet valve assembly.
Steps to remove and replace the main control (ACU) unit of the washer.
Instructions for removing the glass lid from specific washer models.
Procedure for removing the steel lid from specific washer models.
Detailed steps for removing the top panel of the washer.
Instructions for removing the 2-in-1 agitator specific to certain washer models.
Steps to remove the impeller cap on models with a 2-in-1 agitator.
Guide to removing the impeller from the washer basket.
Instructions for removing the tub ring, noting limited working space.
Steps to remove the washer basket and its retaining nut.
Detailed procedure for removing the lid lock mechanism, including safety warnings.
Instructions for removing the shifter assembly and its related parts.
Procedure for removing the drain pump assembly, including safety warnings.
Steps to remove the drive belt and motor, including safety precautions.
Instructions for removing the splutch pulley and housing.
Procedure for removing the gearcase assembly, noting alternatives.
To Next Page
