PRODUCT MODEL NUMBERS
The dimensions shown show recommended spacing allowed, with tested spacing of 0" (0 mm) clearance on sides.
■ Additional clearances might be required for wall, door, oor moldings.
■ Additional spacing should be considered for ease of installation and servicing.
■ Additional spacing on all sides of the washer is recommended to reduce noise transfer.
■ For closet installation, with a door, minimum ventilation openings in the top and bottom of the door are required.
Louvered doors with equivalent ventilation openings are acceptable.
■ Companion appliance spacing should also be considered.
WTW8200Y, WTW8240Y, WTW8400Y,
WTW8440Y, WTW8600Y, WTW8800Y
Top Load Washer
Front view
Side view
Closet door
with vents
* Required spacing
15
7
⁄8"*
(403 mm)
1"
(25 mm)
27
1
/
2
"
(699 mm)
1"
(25 mm)
27"
(686 mm)
5"*
(127 mm)
14"* max.
(356 mm)
48 in.
2
*
(310 cm
2
)
24 in.
2
*
(155 cm
2
)
3"*
(76 mm)
3"*
(76 mm)
1"
(25 mm)
Installation spacing for recessed area or closet installation
To Next Page
Need help?
General